Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Toshiba e-Studio 5540c — Trang 30/44

Code: E773

Description: Intermediate transport sensor paper remaining jam
Causes: Original exit reverse sensor
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board Perform the 05-3210
Roller
Remedy: RADF • Check if there is any paper on each sensor. Remove it if there is. Original exit reverse sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[B]) • Connector check • Harness check Registration sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[F]) • Connector check • Harness check Original width detection sensor-1 • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Original width detection sensor-2 • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[H]) • Connector check • Harness check Original width detection sensor-3 • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[D]) • Connector check • Harness check Intermediate transport sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[G]) • Connector check • Harness check Reading end sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Exit sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[E]) • Connector check • Harness check RADF board • Connector check (CN74, CN75) • Board check Drive unit, Rollers • Gear check • Roller check

Code: E774

Description: Reading start sensor paper remaining jam
Causes: Original reading start sensor RADF board Perform the 05-3210 Roller Registration roller, Read roller
Remedy: Registration roller Read roller • Cleaning Original reading start sensor • Automatic adjustment (Perform the 05-3210) • Connector check • Harness check RADF board • Connector check (CN75) • Board check Drive unit, Rollers • Gear check • Roller check

Code: E775

Description: Reading end sensor paper remaining jam
Causes: Original exit reverse sensor
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board Perform the 05-3210
Roller
Remedy: RADF • Check if there is any paper on each sensor. Remove it if there is. Original exit reverse sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[B]) • Connector check • Harness check Registration sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[F]) • Connector check • Harness check Original width detection sensor-1 • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Original width detection sensor-2 • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[H]) • Connector check • Harness check Original width detection sensor-3 • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[D]) • Connector check • Harness check Intermediate transport sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[G]) • Connector check • Harness check Reading end sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Exit sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[E]) • Connector check • Harness check RADF board • Connector check (CN74, CN75) • Board check Drive unit, Rollers • Gear check • Roller check

Code: E777

Description: Exit sensor paper remaining jam
Causes: Original exit reverse sensor
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board Perform the 05-3210
Roller
Remedy: RADF • Check if there is any paper on each sensor. Remove it if there is. Original exit reverse sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[B]) • Connector check • Harness check Registration sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[F]) • Connector check • Harness check Original width detection sensor-1 • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Original width detection sensor-2 • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[H]) • Connector check • Harness check Original width detection sensor-3 • Sensor check (Perform the input check: 03: [FAX]/ON/[5]/[D]) • Connector check • Harness check Intermediate transport sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[8]/[G]) • Connector check • Harness check Reading end sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[F]) • Connector check • Harness check Exit sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[E]) • Connector check • Harness check RADF board • Connector check (CN74, CN75) • Board check Drive unit, Rollers • Gear check • Roller check

Code: E860

Description: Original jam access cover open: The Original jam access cover has opened during RADF operation.
Causes: Original exit reverse sensor RADF board Perform the 05-3210
Remedy: Original jam access cover • Close the Original jam access cover if it is opened. • Remove if there is any original before closing it. Original jam access cover opening/ closing sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[C]) • Connector check • Harness check RADF board • Connector check (CN74) • Board check

Code: E870

Description: RADF open jam: RADF has opened during RADF operation.
Causes: RADF opening/closing sensor RADF board Perform the 05-3210
Remedy: RADF • Close the RADF if it is opened. • Remove if there is any original before closing it. RADF opening/closing sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[D]) • Connector check • Harness check RADF board • Connector check (CN74) • Board check

Code: E871

Description: Cover open jam in the read ready status: Jam caused by opening of the Original jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment.
Causes: Original jam access cover opening/ closing sensor RADF board Perform the 05-3210
Remedy: RADF • Close the RADF if it is opened. • Remove if there is any original before closing it. Original jam access cover opening/ closing sensor • Sensor check (Perform the input check: 03: [FAX]/ON/[7]/[C]) • Connector check • Harness check RADF board • Connector check (CN74) • Board check

Code: E890

Description: ADF time out jam
Causes:
Remedy: RADF • Check if there is any paper in the RADF. Remove it if there is. Equipment • Check if there is any paper in the equipment. Remove it if there is. • If a jam still occurs, turn the power OFF and then back ON to check if the equipment operates normally.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie