Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 6120 — Trang 2/3

Code: 15

Description: Transfer Belt Cleaning Blade Pressure/Retraction Failure
Causes: *Retraction Position Sensor /Cleaning Blade (PC6) Pressure/Retraction Solenoid /Cleaning Blade (SL3) Main Motor (M1) PWB-A (Engine Control Board) * PC6 is part of the transfer belt.
Remedy: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SL3 connector for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 PC6 sensor check. PWB-A PJ9A-11 (ON) 2-F 6 SL3 operation check. PWB-A PJ10-5 (REM) 2-F 7 M1 operation check. PWB-A PJ8A-5 (REM) PWB-A PJ8A-8 (LOCK) 2-G¡«H 8 Change PWB-A.

Code: 16

Description: Transfer Belt Rotation Failure
Causes: Transfer Belt PWB-A (Engine Control Board)
Remedy: 1 Check the PWB-A connector for proper connection and correct as necessary. 2 Change Transfer Belt. 3 Change PWB-A.

Code: 17

Description: Toner Carousel Failure
Causes: Toner Carousel Motor (M2) Toner Carousel Positioning Sensor (PC3) PWB-A (Engine Control Board)
Remedy: 1 Check the M2 connector for proper connection and correct as necessary. 2 Check M2 for proper drive coupling and correct as necessary. 3 Check the PWB-A connector for proper connection and correct as necessary. 4 PC3 sensor check. PWB-A PJ5A-11 (ON) 4-C 5 M2 operation check. PWB-A PJ5A-1¡«4 (Pulse Output) 4-B 6 Change PWB-A.

Code: 18, 19, 1A, 1B

Description: Fuser Failures: 18: Fuser Warm-Up Failure 19: Fuser Low Heating Roller Temperature 1A: Fuser High Heating Roller Temperature 1B: Fuser Faulty Thermistor
Causes: Fuser PWB-A (Engine Control Board) Power Unit (PU)
Remedy: 1 Check that the input voltage to the printer matches the configuration of the engine (110/220 V) 2 Check the Fusing Unit for correct installation (whether it is secured in position). 3 Check the Fusing Unit, LVPS (PU), and PWB-A for proper connection and correct as necessary. 4 Check the lever and position of the Safety Switch (S2) and correct as necessary. 5 Change the Fusing Unit. 6 Change PWB-A. 7 Change LVPS (PU).

Code: 21

Description: OHP Detect Sensor
Causes: OHP Sensor (PC2A) PWB-A (Engine Control Board)
Remedy: 1 Check the PWB-A connector for proper connection and correct as necessary. 2 PC2A sensor check. PWB-A PJ12A-6 (ON) 2-D 3 Change PWB-A.

Code: 23

Description: Waste Toner Near Full Error
Causes: Waste Toner Near Full Detection Board (PWB-C) Imaging Unit PWB-A (Engine Control Board)
Remedy: 1 Check the PWB-C connector for proper connection and correct as necessary. 2 Check the PWB-A connector for proper connection and correct as necessary. 3 Change the Imaging Unit. 4 Change PWB-C. 5 Change PWB-A.

Code: 29

Description: Faulty NVRAM Counter
Causes: NVRAM PWB-A (Engine Control Board)
Remedy: 1 Unplug the power cord and plug it in, then turn OFF and ON the Power Switch. 2 Check NVRAM (PJ26) on PWB-A for proper connection and correct as necessary. 3 Change PWB-A.

Code: 2A

Description: Faulty NVRAM Data
Causes: NVRAM PWB-A (Engine Control Board)
Remedy: 1 Unplug the power cord and plug it in, then turn OFF and ON the Power Switch. 2 Check NVRAM (PJ26) on PWB-A for proper connection and correct as necessary. 3 Change PWB-A.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie