Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 4150 — Trang 11/11

Code: 12A

Description: Finisher PWB DIP Switch Settings RAP To show the correct settings for the DIP switches on the finisher PWB. Problems that can result from incorrect DIP switch settings are: • False jam clearance instructions for the finisher. • Communication errors between the finisher and the machine. • Erratic behavior of the finisher.
Remedy: 1. Remove the finisher PWB access cover, PL 12.45 Item 30. 2. Check that the DIP switch settings are as shown in Figure 1. 3. If necessary, switch off the machine. Correct the DIP switch settings, then switch on the machine.

Code: 14-100

Description: CCD Lock RAP 14-100 The machine has detected a mechanical fault with the CCD module.
Remedy: 1. If necessary, remove the finisher, REP 12.1. Check that the scanner lock, PL 14.10 Item 20 is completely unlocked. 2. Remove the scanner top cover assembly, refer to REP 14.2. 3. Check that the CCD module, PL 14.10 Item 2 moves freely from left to right. 4. Check the wiring between the scanner drive motor, PL 14.10 Item 4 and CN2 on the Scanner PWB. 5. If necessary, install new components: • Scanner drive motor assembly, PL 14.10 Item 4. • Scanner PWB, PL 14.10 Item 15. • CCD module, PL 14.10 Item 2. • Scanner assembly, PL 14.10 Item 1.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie