Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5230 — Trang 34/35

Code: 093-406

Description: Black Toner Pre-Near Empty Black Toner Cartridge is Pre-near empty
Remedy: Check the following: • Replace the Black Toner Cartridge if empty (PL 4.1) • That the Black Toner Cartridge is inserted properly • For Black Toner spills in the machine

Code: 093-912

Description: Black Toner Empty Black Toner Cartridge is Empty
Remedy: Check for Image Quality Defects. An Image Quality Defect is present. Y↓N→Run ProCon On and follow the Corrective Actions. The Defect is Low Image Density or Uneven Density. Y↓N→The Defect is Background. Y↓N→Run ProCon On and follow the Corrective Actions. Go to IQ6 and troubleshoot IOT Background. Go to IQ3 and troubleshoot Low Image Density or Uneven Density.

Code: 093-924

Description: Toner K Crum Communication Failure K Toner CRUM Comm Failure.
Remedy: Fault codes 093-940 (Y), 093-941 (M), and 093-942 (C) are also present on the UI. Y↓N→Replace the Black Toner Cartridge (PL 4.1). Replace the Toner CRUM (Toner Cartridge Door) (PL 4.2). If the fault codes are still present, replace the MCU PWB (PL 9.1).

Code: 093-925

Description: Toner K Crum Data Broken Failure
Remedy: Fault codes 093-950 (Y), 093-951 (M), and 093-952 (C) are also present on the UI. Y↓N→Replace the Black Toner Cartridge (PL 4.1). Replace the Toner CRUM (Toner Cartridge Door) (PL 4.2). If the fault codes are still present, replace the MCU PWB (PL 9.1).

Code: 093-926

Description: Toner K Crum Data Mismatch Failure
Remedy: Fault codes 093-960 (Y), 093-961 (M), and 093-962 (C) are also present on the UI. Y↓N→Replace the Black Toner Cartridge (PL 4.1). Replace the Toner CRUM (Toner Cartridge Door) (PL 4.2). If the fault codes are still present, replace the MCU PWB (PL 9.1).

Code: 094-417

Description: BTR Unit Pre Warning RAP The BTR is near end of life.
Remedy: Verify that the BTR is near end of life (Detailed Maintenance Activities). The BTR is near end of life. Y↓N→Replace the MCU PWB (PL 9.1). There is no need for service at this time. Return to Service Call Procedures.

Code: 094-420

Description: BTR Unit Warning RAP The BTR reached end of life.
Remedy: Verify that the BTR Assembly is at end of life (Detailed Maintenance Activities). The BTR Assembly is at end of life. Y↓N→Replace the MCU PWB (PL 9.1). Replace the BTR Assembly (PL 2.6).

Code: 102-356

Description: Controller Software RAP An internal Controller error shut down the processor.
Remedy: Check the installation of the P-Kit/HDD-Kit/RAM boards. Reload Software (ADJ 9.3.1). Replace the ESS PWB (PL 9.2).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie