Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox WorkCentre 5230 — Trang 35/35

Code: 102-380

Description: UI Control RAP An internal UI controller error shut down the processor.
Remedy: Reload Software (ADJ 9.3.1). Replace the ESS PWB (PL 9.2).

Code: 102-381

Description: UI Data Link RAP During transmission between the ESS and the UI an initialization send error or a retrieve error for receiving data was detected by the ESS.
Remedy: Check the connection between the ESS and the UI. Pull out and insert or replace the DIMM (PL 9.2). Reload Software (ADJ 9.3.1). Replace the ESS PWB (PL 9.2) If the problem persists, replace the Control Panel UI PWB (PL 11.2).

Code: 102-382

Description: Application Layer Command RAP • The required parameters were not sent by the UI. • A length error was detected in the variable length parameter. • A confirmation message was not received within the specified time when a request message was sent to the UI.
Remedy: Pull out and insert or replace the DIMM (PL 9.2). Reload Software (ADJ 9.3.1). Replace the ESS PWB (PL 9.2).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie