• Code: 016-503 ... 016-507
• Description: Server Setting Error
• Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2)
• Remedy: 1 Check the network connection Check the network connection using the ping command. Does the printer connect the network? Go to step 4. Go to step 2. 2 Check the network connection Reseat the network cable connector. Does the error still occur when using the server? Go to step 3. Complete. 3 Contact the System Admin to verify the following: • Are Network settings correct? • Are Address Book settings correct? • Do printer settings match server settings? Go to step 4. Make changes as necessary. 4 Check the IP Board installation Reseat the IP Board. Does the error still occur when using the server? Replace the IP Board. Complete.

• Code: 016-520
• Description: Applicable Error Code
• Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2) • MCU Board (SFP PL8.2.13; MFP PL8.3.6)
• Remedy: 1 Does the error still occur when the power is turned Off and On? Go to step 2. Complete. 2 Check after replacing the IP Board. Replace the IP Board. Does the error still occur when the power is turned Off and On? Replace the MCU Board. Complete.

• Code: 016-530
• Description: Applicable Error Code
• Causes: • IP Board (ESS) (MFP PL8.1.2)
• Remedy: 1 Check the LDAP settings Is LDAP set correctly? Go to step 4. Verify that LDAP settings are correct in CWIS. 2 Check the firmware version Is the firmware the latest version? Go to step 3. Update the firmware, then go to step 3. 3 Check the IP Board installation Reseat the IP Board. Does the error still occur when turning the power Off and On? Replace the IP Board. Complete.

• Code: 016-718
• Description: Memory Over flow
• Causes: • Optional Memory Card (SFP PL8.1.15; MFP PL8.1.4)
• Remedy: 1 Check for memory expansion. Is additional memory installed? Is the additional memory installed properly? Go to step 2. Install additional memory. Or, reinstall it properly. 2 In the printer driver, set the Print Mode to “Standard”. Does the error persist during printing? Go to step 3. Complete. 3 In the Control Panel, go to Admin Menu > Maintenance (Mode) and delete data by executing Clear Storage. Does the error persist during printing? The current printing job process cannot be continued because the memory capacity is exceeded. Complete.

• Code: 016-720
• Description: PDL Error
• Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2)
• Remedy: 1 Check the cable between the Printer and PC (or Printer and Hub). - For local printer: USB cable (USB2.0) - For network printer: Ethernet cable (10Base-T/100Base-TX / 1000Base-T) Does the cable meet the specifications? Go to step 2. Use a cable that meets the specifications. - For local printer: USB cable (USB2.0) - For network printer: Ethernet cable(10Base-T/ 100Base-TX / 1000Base-T) 2 Plug and unplug the cable. (USB cable or I/F cable) Does the error still occur when printing? Go to step 3. Complete. 3 Replace the cable. (USB cable or I/F cable) Does the error still occur when the power is turned Off and On? Replace the IP Board. Complete.

• Code: 016-737, 016-741, 016-742, 016-743, 016-744, 016-745
• Description: Download Format Error / Download Protect Error / Download ID Error / Download Range Error / Download Check Sum Error / Download header Error
• Causes: • IP Board (ESS) (SFP PL8.1.7; MFP PL8.1.2)
• Remedy: 1 Check the download file. Was the file for WC 6505 downloaded? Go to step 2. Re-download the correct file. 2 Check the cable between the Printer and PC (or Printer and Hub). - For local printer: USB cable (USB2.0) - For network printer: Ethernet cable (10Base-T/ 100Base-TX / 1000Base-T) Does the cable meet the requirements? Go to step 3. Use a cable that meets the requirements. - For local printer: USB cable (USB2.0) - For network printer: Ethernet cable (10Base-T/ 100Base-TX / 1000Base-T) 3 Plug and unplug the cable. Does the error still occur when the power is turned Off and On? Go to step 4. Complete. 4 Replace the Cable. Does the error still occur when the power is turned Off and On? Replace the IP Board. Complete.

• Code: 016-753, 016-755
• Description: PDF password error / PDF print disabled error
• Causes:
• Remedy: 1 Check the PDF data. -Enter the correct PDF document password again. -Change the PDF document security setting. Does the error still occur when printing? Complete. Update the firmware.

• Code: 016-757
• Description: Auditron - Invalid User
• Causes:
• Remedy: 1 Check the user‘s account setting in CWIS (http://xxx.xxx.xxx.xxx/ frameprinter.htm). Set the correct user‘s account (user name and password). Does the error still occur when printing? Complete. Update the firmware.