Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Zebra 140 — Trang 4/4

Code: 25

Display:
Description: Vertical drift in top-ofform registration.
Causes: A plus or minus 4-6 dot row (approx. 1/2mm) vertical drift is possible due to the different tolerances of the mechanical parts and printer modes.

Code: 26

Display:
Description: Label jam in rear area of printhead.
Causes: Upper Media Plate (Snap plate) needs cleaning

Code: 27

Display:
Description: Print label feeds out and then backfeeds immediately resting under the printhead
Causes: Printer set for cutter mode with no cutter installed.

Code: 28

Display:
Description: Changes in parameter settings did not take effect.
Causes: Parameters are set incorrectly. If problem continues, there may be a problem on main logic board.

Code: 29

Display:
Description: Missing LCD characters or parts of characters
Causes: LCD may need replacing

Code: 30

Display:
Description: ZPL was sent to printer, but not recognized. Buffer light remains ON.
Causes: Communications parameters are incorrect. Prefix and delimiter characters set in printer do not match the ones used in ZPL.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie