Mã lỗi Zebra 140
Code:
01
Display:
Description: All LEDs light, but nothing displays on LCD and printer will not operate.
Causes: Main Logic Board or EPROM faulty.
Code:
02
Display:
Description: Buffer Empty LED turns OFF after 15 sec. but all other LEDs stay ON
Causes: Main Logic Board Dynamic RAM faulty.
Code:
03
Display:
Description: ONAll LEDs flash ON and OFF
Causes: No significant amount of DRAM tested good
Code:
04
Display:
Description: Take Label LED Flashing
Causes: Printer Misconfigured for Peel- Off Mode
Code:
05
Display:
Description: Printer locks up while running Power On Self Test
Causes: Main logic Board failure
Code:
06
Display: CHECKSUM FOR ROM SET INVALlD
Description:
Causes: A ROM checksum is incorrect.
Code:
07
Display: EEPROM CHECKSUM INVALID
Description:
Causes: EEPROM checksum is incorrect
Code:
08
Display: ERROR CONDITION PAPER OUT
Description:
Causes: Printer stops. PAPER OUT and PAUSE LED ON. No media loaded or incorrectly loaded. Misadjusted Media Sensor