Danh mục sản phẩm

Code :

Code: 17
Display:
Description: Truncated print, no print or Feed button operates incorrectly while using non-continuous media
Causes: Maximum label length parameter set less than parameter set less than , the actual label length. Printer, that is in rewind or peel off mode, was powered ON without media or backing around rewind spindle.

Code: 18
Display:
Description: Long tracks of missing print on several labels
Causes: Wrinkled ribbon. Print Element damaged.

Code: 19
Display:
Description: Fine gray lines on blank labels at angles
Causes: Wrinkled ribbon

Code: 20
Display:
Description: Wrinkled ribbon
Causes: Ribbon fed through machine incorrectly. Incorrect burn temperature. Incorrect printhead pressure or balance. Media not feeding properly; it is walking from side to side.

Code: 21
Display:
Description: Continued wrinkled ribbon
Causes: Strip plate needs adjusting. Ribbon supply tension needs adjusting. Printhead shaft needs adjusting using the wear plate. Printhead needs ealigning with platen roller. Ribbon take up tension. needs adjusting to the minimum value. 3 point mount for ribbon supply spindle needs adjusting Ribbon supply core slipping; spindle blades need adjusting

Code: 22
Display:
Description: Light printing or no printing on the left or right side of the label.
Causes: Printhead needs balancing. Printhead shaft needs adjusting using the wear plate.

Code: 23
Display:
Description: Mis-regis tration/Skips Labels
Causes: Misadjusted Media Sensors. Improper Spindle Tensions. Improper ZPL Format

Code: 24
Display:
Description: Misregistration and misprint of 1 to 3 labels
Causes: Media was pulled when motor was not moving. Printer, that is in rewind or peel off mode, was powered ON without media or backing around rewind spindle. Misadjusted Media Sensor.

< 1 2 3 4 >

0