Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9020CDW — Trang 14/18

Code: 9A02

Display: Registration failed Insufficient Toner for Registration.
Description: Dot counter or develop roller counter of color toner has reached the upper limit during auto color registration performed from the control panel.
Causes: Main PCB failure

Code: 9A03

Display: Registration failed Press [OK], and try again.
Description: Error occurred during patch data printing in auto color registration performed from the control panel.
Causes: 1 Registration mark sensor L/ registration mark sensor R dirty 2 Registration mark L PCB/ Registration mark R PCB harness connection failure 3 Eject sensor PCB harness connection failure 4 Failure in printed measurement pattern image 5 Registration mark L failure 6 Registration mark R failure 7 Main PCB failure

Code: A000

Display: Scan Unable Remove the original document. Turn the power off, then on again.
Description: Upon scanning the second side in duplex scanning, scanned data cannot be output with the required number of pixels and image processing is not completed successfully.
Causes: 1 Second side CIS unit calibration data error 2 Second side CIS unit failure 3 Main PCB failure

Code: A200

Display: Document Jam Clear the scanner jam, then press the Stop Key.
Description: During document scanning, the first side document scanning position sensor detected that the document length was 90 cm or more.
Causes: 1 First side document scanning position actuator catching on some position 2 First side document scanning position sensor failure 3 Main PCB failure

Code: A300

Display: Document Jam Clear the scanner jam, then press the Stop Key.
Description: Though a document was fed and conveyed by the specified distance or longer, the first side document scanning position sensor did not detect the passing of the paper.
Causes: 1 Coming off of first side document scanning position actuator. 2 First side document scanning position sensor failure 3 Main PCB failure

Code: A400

Display: Cover is Open Close the ADF Cover
Description: The ADF cover sensor detected that the ADF cover was opened.
Causes: 1 Coming off of ADF cover actuator. 2 ADF cover/document detection sensor PCB harness connection failure 3 ADF cover sensor failure 4 Main PCB failure

Code: A500

Display: Scan Unable A5 Remove the original document. Turn the power off, then on again
Description: Upon scanning a fax, the first side CIS white or black calibration data was not within the normal range.
Causes: 1 First side/second side CIS unit calibration data error 2 First side CIS unit failure 3 Second side CIS unit failure 4 Main PCB failure

Code: A600

Display: Scan Unable A6 See Troubleshooting and routine maintenance chapter in User's Guide.
Description: Though a fax was scanned again after A500 error, the first side CIS white or black calibration data was not within the normal range.
Causes: 1 First side/second side CIS unit calibration data error 2 First side CIS unit failure 3 Second side CIS unit failure 4 Main PCB failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie