• Code: 8D02
• Display: Small paper Open the Back Cover and then press Start
• Description: When printing with the back cover closed, the paper size selected in the print data is smaller than the valid size.
• Causes: 1 Main PCB failure

• Code: 8E01
• Display: Size mismatch Reload correct paper.
• Description: Upon fax reception, the paper size setting is the one other than A4, Letter, Legal, and Folio.
• Causes: 1 Main PCB failure

• Code: 8E02
• Display: Size mismatch Reload correct paper.
• Description: Upon receiving a fax or printing a list or report, the size of the paper loaded in the paper tray was detected to be shorter than Letter by 10 mm or more.
• Causes: 1 Registration rear actuator catching on some position 2 Registration rear sensor failure 3 Main PCB failure

• Code: 8E03
• Display: Size mismatch Reload correct paper.
• Description: When a received fax, list, or report was printed on multiple pages, the size of the paper loaded in the paper tray was detected to be shorter than the size selected in the machine by 2 mm or more.
• Causes: 1 Registration rear actuator catching on some position 2 Registration rear sensor failure 3 Main PCB failure

• Code: 9002
• Display: Size Mismatch Reload correct paper in Tray1, then press Start.
• Description: The size of paper loaded in the paper tray and the one specified from the driver are not same when paper is fed from the paper tray.
• Causes: 1 Registration rear actuator catching on some position 2 Registration rear sensor failure 3 Main PCB failure

• Code: 9302
• Display: No Paper Reload paper in Tray.
• Description: For printing by feeding paper from the paper tray, the paper feed sensor detected that no paper was in the paper tray.
• Causes: 1 Foreign object in pick-up roller 2 Paper feed sensor PCB harness connection failure 3 Paper feed actuator catching on some position 4 Paper feed sensor failure 5 Gear failure inside of process drive unit 6 Main PCB failure

• Code: 9307
• Display: Size Mismatch Reload paper in Tray.
• Description: Upon receiving a fax or printing a list or report, the machine detected that paper tray empty of paper.
• Causes: 1 Registration front/rear/manual feed sensor PCB harness connection failure 2 Registration rear actuator catching on some position 3 Registration front sensor failure 4 Main PCB failure

• Code: 9701
• Display: Size Error 2-sided Press Stop Key. Specify the correct paper and load the same size paper as the Printer driver setting.
• Description: For 2-sided printing, the tray whose paper size was not supported by 2-sided printing was selected.
• Causes: 1 Main PCB failure