Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9020CDW — Trang 10/18

Code: 6B03

Display: Drum Stop Replace the Drum Unit. Refer to the instructions in the carton of the new drum.
Description: Electric discharge was detected when the number of the drum unit (Magenta) rotations had become more than twice of the upper limit.
Causes: 1 Dirt on the GRID terminals of the main body 2 Dirt on the terminal of the high-voltage power supply PCB 3 High-voltage power supply PCB failure 4 Main PCB failure

Code: 6B04

Display: Drum Stop Replace the Drum Unit. Refer to the instructions in the carton of the new drum.
Description: Electric discharge was detected when the number of the drum unit (Cyan) rotations had become more than twice of the upper limit.
Causes: 1 Dirt on the GRID terminals of the main body 2 Dirt on the terminal of the high-voltage power supply PCB 3 High-voltage power supply PCB failure 4 Main PCB failure

Code: 6B0A

Display: Drum ! Slide the Green tab on Drum Unit.
Description: GRID current failure was detected in a state other than immediately after power was turned ON or the joint cover ASSY was closed.
Causes: 1 Dirt on the GRID terminals of the main body 2 Dirt on the terminal of the high-voltage power supply PCB 3 High-voltage power supply PCB failure 4 Main PCB failure

Code: 6E00

Display: Toner Error One or more Toner Cartridges are not detected. Pull out and reinsert all 4 Toner Cartridges.
Description: The develop release sensor detected the develop roller disengagement or engagement failure.
Causes: 1 Develop release sensor harness connection failure 2 High-voltage power supply PCB harness connection failure 3 Develop release sensor failure 4 Misalignment of develop clutch cam 5 Develop release clutch failure 6 High-voltage power supply PCB failure 7 Main PCB failure

Code: 7000

Display: Jam Inside Open the Top Cover, pull out all four drum and toner cartridge assemblies and remove the jammed paper.
Description: After the registration rear sensor detects the end of paper pass, the eject sensor does not detect paper pass.
Causes: 1 Foreign object inside machine 2 Eject actuator that has come off or that has been caught 3 Fuser cover installation failure 4 Eject sensor PCB harness connection failure 5 Fuser cover failure 6 Eject sensor failure 7 Fuser unit failure 8 Main PCB failure

Code: 7100

Display: Jam Rear Open the Back Cover and remove the jammed paper, then press [Start].
Description: After the registration rear sensor detected that paper has passed, eject sensor continues to detect paper pass.
Causes: 1 Foreign object at the back of the machine 2 Eject actuator catching on some position 3 Fuser cover installation failure 4 Back cover installation failure 5 Eject sensor failure 6 Back cover failure 7 Eject roller 1 failure 8 Main PCB failure

Code: 7300

Display: Jam Tray Pull the paper tray completely out of the machine and remove the jammed paper
Description: After the paper feed sensor detects paper pass, the registration front sensor does not detect paper pass after a set period of time.
Causes: 1 Foreign object inside machine 2 Paper dust cleaning roller installation failure 3 Registration front actuator that has come off or that has been caught 4 Registration rear actuator that has come off or that has been caught 5 Registration front/rear/manual feed sensor PCB harness connection failure 6 Registration front/rear/manual feed sensor PCB failure 7 Feed roller failure 8 Main PCB failure

Code: 7700

Display: Jam 2-sided Pull the paper tray completely out of the machine. Check inside the machine towards the rear. Or open the Back Cover to remove the jammed paper.
Description: After the first side is printed in 2-sided printing mode, the registration front sensor does not detect paper pass after a set period of time.
Causes: 1 Foreign object inside the duplex path 2 Fuser cover installation failure 3 Back cover installation failure 4 Main PCB failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie