Mã lỗi Brother DCP9020CDW — Trang 18/18
Display: -
Description: After the initialization of the panel PCB, no response was sent from the panel PCB for a period of time.
Causes: 1 Panel PCB failure 2 Main PCB failure
Display: Print Unable DB Turn the power off and then back on again.
Description: Communication between the main PCB and panel PCB is unavailable.
Causes: 1 Panel PCB harness connection failure 2 Panel PCB failure 3 Main PCB failure
Display: Print Unable E0 Turn the power off and then back on again.
Description: Some ROM checksum error occurred.
Causes: Main PCB failure
Display: Print Unable E1 Turn the power off and then back on again.
Description: Program error.
Causes: Main PCB failure
Display: Print Unable E5 Turn the power off and then back on again.
Description: Error occurred when DRAM on the main PCB ASSY was accessed.
Causes: Main PCB failure
Display: Print Unable E6 Turn the power off and then back on again.
Description: Error occurred during writing to EEPROM on the main PCB ASSY.
Causes: Main PCB failure
Display: Unusable Device Remove the Device. Turn the power off and back on again.
Description: Overcurrent was caused because a USB device that did not meet the specifications was inserted into the USB port.
Causes: 1 USB host PCB failure 2 Main PCB failure
Display: -
Description: Setting by country code is not entered.
Causes: 1 During function code 74, power is turned OFF. 2 Main PCB failure