Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Brother DCP9020CDW — Trang 5/18

Code: 4201

Display: Replace Drum:BK
Description: Number of the drum unit (Black) rotations has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new drum unit and resetting the drum counter

Code: 4202

Display: Replace Drum:Y
Description: Number of the drum unit (Yellow) rotations has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new drum unit and resetting the drum counter

Code: 4203

Display: Replace Drum:M
Description: Number of the drum unit (Magenta) rotations has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new drum unit and resetting the drum counter

Code: 4204

Display: Replace Drum:C
Description: Number of the drum unit (Cyan) rotations has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new drum unit and resetting the drum counter

Code: 4300

Display: Replace Parts Belt Unit
Description: The belt unit will reach the end of life soon. (90%)
Causes: 1 Main PCB failure if the error code remains after replacing with a new belt unit and resetting the belt counter

Code: 4400

Display: Replace Parts Belt Unit
Description: Number of pages printed with the belt unit has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new belt unit and resetting the belt counter

Code: 4500

Display: Replace Parts Fuser Unit
Description: Printable pages set for the fuser unit has reached the upper limit. (Printing is not stopped.)
Causes: 1 Main PCB failure if the error code remains after replacing with a new fuser unit and resetting the fuser unit counter

Code: 4700

Display: Replace Parts WT Box End Soon
Description: The waste toner sensor detected that the waste toner box is almost full.
Causes: 1 Dirt on the contact of waste toner sensor in high-voltage power supply PCB 2 High-voltage power supply PCB failure 3 Main PCB failure
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie