Danh mục sản phẩm

Code :

Code: E503-0003
Description: An error is detected in the communication with the saddle sitcher.
Causes: A communication error has been detected.

Code: E504-0004
Description: The adjustment of the sensor made using a DIP switch is faulty.
Causes: The output of the height sensor (PS1) is faulty.

Code: E505-0001
Description: At power-on, the check sum value is found to be faulty.
Causes: The backup RAM is faulty.

Code: E510
Description: After the motor drive signal has been generated, the input signal of the nonsort motor clock sensor (PI10) does not change within 60 msec.
Causes: The no-sort motor (M6) does not rotate.

Code: E512-0001
Description: At the start of operation, the target number of clock pulses cannot be obtained from the delivery motor clock.
Causes: The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty.

Code: E512-0002
Description: During feeding, clock pulses are absent for a period equivalent of 200 mm.
Causes: The delivery motor is faulty. The delivery motor clock sensor (PI10) is faulty.

Code: E525
Description: Auto adjustment of the bin inside paper sensor (S1, S2) fails, or the auto adjustment value has an error.
Causes: Auto adjustment of the bin inside paper sensor (S1, S2) is faulty.

Code: E530
Description: After the motor drive signal has been generated, the input signal of the guide bar HP sensor (PI3) does not change within 200 msec.
Causes: The guide bar swing motor (M3) fails to rotate.

‹ First < 5 6 7 8 9 10 11 > Last ›

0