• Code: E110-0001
• Description: Optical assembly error (Scanner motor)
• Causes: Optical assembly error (Scanner motor rotation failure)
• Remedy: • Check the contact of the connector between the laser scanner unit and the DC controller. • Replace the laser scanner unit.

• Code: E196-0000
• Description: Invalid RFU execution requested
• Causes: D-con update for the host machine or the optional cassette is not completed.
• Remedy: Replace the DC controller PCB

• Code: E196-0001
• Description: Invalid RFU execution requested
• Causes: D-con update for the optional cassette is not completed.
• Remedy: Replace the DC controller PCB

• Code: E197-0002
• Description: Engine FN Error
• Causes: Error in DC Controller software
• Remedy: 1. Turn OFF and then ON the power. 2. Download the Dcon firmware again by Updater. 3. Replace the DC controller PCB

• Code: E198-0000
• Description: DC controller memory failure
• Causes: • A checksum failure is found in the block where specific information of the DC controller PCB is saved. • A communication error occurred when reading the specific information of the DC controller PCB from the NVRAM at power-on.
• Remedy: If the failure cannot be removed by turning the power OFF/ON, replace the DC controller PCB.

• Code: E245
• Description: System Error
• Causes: System Error
• Remedy: Contact the sales companies.

• Code: E246
• Description: System Error
• Causes: System Error
• Remedy: Contact the sales companies.

• Code: E247
• Description: System Error
• Causes: System Error
• Remedy: Contact the sales companies.