Code :
- Code: E744-0900
- Description: Model code mismatch
- Causes: Model code mismatch
- Remedy: Change to proper bootable.
- Code: E744-1000
- Description: Model code mismatch
- Causes: Mismatch of the series or model of the firmware sent at the time of downloading
- Remedy: Check the supported series or model of the firmware, and burn the correct series or model of firmware.
- Code: E744-1100
- Description: Model code mismatch
- Causes: Detection of falsification of the Controller Board
- Remedy: - Turn OFF and then ON the power. - Replace the Main Controller PCB.
- Code: E748-2012
- Description: Error in Main Controller
- Causes: Failed to rewrite due to no more alternative block of Flash ROM (NAND) available.
- Remedy: -Replace the Main Controller PCB.
- Code: E748-4000
- Description: Error in Main Controller
- Causes: Timeout of G-Chip loop back
- Remedy: Replace the main controller PCB.
- Code: E748-4020
- Description: Error in Main Controller
- Causes: Unknown device detected on the PCI
- Remedy: Replace the main controller PCB.
- Code: E760-0000
- Description: CPU Processing Error
- Causes: CPU exception occurred.
- Remedy: Turn on the power again.
- Code: E804-0000
- Description: Fan failure
- Causes: Power supply fan failure
- Remedy: • Check the connection of the connector. • Replace the fan. • Check the harness (check for disconnected/pinched harness)