• Code: E57B-8002
• Description: Error in the paper trailing edge pushing guide motor(Finisher-A1). The paper trailing edge pushing guide HP sensor does not detect the paper trailing edge pushing guide when the paper trailing edge pushing guide motor has been driven for 3sec.
• Remedy: 1. The connector of the paper trailing edge pushing guide HP sensor (S113) or the paper trailing edge pushing guide motor (M113) are disconnected. 2. The wiring of the paper trailing edge pushing guide HP sensor (S113) or the paper trailing edge pushing guide motor (M113) are faulty. 3. The paper trailing edge pushing guide HP sensor (S113) is faulty. 4. The paper trailing edge pushing guide motor (M113) is faulty. 5. The finisher controller PCB is faulty.

• Code: E57C-8001
• Description: Error in the processing tray paper retainer motor(Finisher-A1). The paper retainer does not come off the paper retainer HP sensor when the processing tray paper retainer motor has been driven for 3sec.
• Remedy: 1. The connector of the paper retainer HP sensor (S135) or the processing tray paper retainer motor (M118) are disconnected. 2. The wiring of the paper retainer HP sensor (S135) or the processing tray paper retainer motor (M118) are faulty. 3. The paper retainer HP sensor (S135) is faulty. 4. The processing tray paper retainer motor (M118) is faulty. 5. The finisher controller PCB is faulty.

• Code: E57C-8002
• Description: Error in the processing tray paper retainer motor(Finisher-A1). The paper retainer HP sensor does not detect the paper retainer when the processing tray paper retainer motor has been driven for 3sec.
• Remedy: 1. The connector of the paper retainer HP sensor (S135) or the processing tray paper retainer motor (M118) are disconnected. 2. The wiring of the paper retainer HP sensor (S135) or the processing tray paper retainer motor (M118) are faulty. 3. The paper retainer HP sensor (S135) is faulty. 4. The processing tray paper retainer motor (M118) is faulty. 5. The finisher controller PCB is faulty.

• Code: E583-8001
• Description: Error in the tray auxiliary guide motor(Finisher-A1). The tray auxiliary guide does not come off the tray auxiliary guide front/rear HP sensors when the tray auxiliary guide motor has been driven for 3sec.
• Remedy: 1. The connector of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are disconnected. 2. The connector of the tray auxiliary guide motor (M120) is disconnected. 3. The wiring of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are faulty. 4. The wiring of the tray auxiliary guide motor (M120) is faulty. 5. The tray auxiliary guide front HP sensor (S137) is faulty. 6. The tray auxiliary guide rear HP sensor (S136) is faulty. 7. The tray auxiliary guide motor (M120) is faulty. 8. The finisher controller PCB is faulty.

• Code: E583-8002
• Description: Error in the tray auxiliary guide motor(Finisher-A1). The tray auxiliary guide front/rear HP sensors does nor detect the tray auxiliary guide when the tray auxiliary guide motor has been driven for 3sec.
• Remedy: 1. The connector of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are disconnected. 2. The connector of the tray auxiliary guide motor (M120) is disconnected. 3. The wiring of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are faulty. 4. The wiring of the tray auxiliary guide motor (M120) is faulty. 5. The tray auxiliary guide front HP sensor (S137) is faulty. 6. The tray auxiliary guide rear HP sensor (S136) is faulty. 7. The tray auxiliary guide motor (M120) is faulty. 8. The finisher controller PCB is faulty.

• Code: E584-8001
• Description: A. Error in the stack delivery lower/shutter motor(Finisher-A1) B. Shutter home position error(Finisher-B1). A. The shutter does not come off the shutter HP sensor when the stack delivery lower/shutter motor has been driven for 3sec. B. The stapler does not leave the shutter home position when the stack ejection motor has been driven for 30 seconds.
• Remedy: A: 1. The connector of the shutter HP sensor (S106) or the stack delivery lower/shutter motor (M122) are disconnected. 2. The wiring of the shutter HP sensor (S106) or the stack delivery lower/shutter motor (M122) are faulty. 3. The shutter HP sensor (S106) is faulty. 4. The stack delivery lower/shutter motor (M122) is faulty. 5. The finisher controller PCB is faulty. B: 1) The shutter home position sensor (PI113) is faulty. 2) The wiring between the finisher controller PCB and stack ejection motor, and between the finisher controller PCB and shutter clutch is faulty. 3) The shutter mechanism is faulty. 4) The stack eject

• Code: E584-8002
• Description: A. Error in the stack delivery lower/shutter motor(Finisher-A1) B. Shutter home position error(Finisher-B1). A. The shutter HP sensor does not detect the shutter when the stack delivery lower/shutter motor has been driven for 3sec. B. The stapler does not return to the shutter home position when the stack ejection motor has been driven for 3 seconds.
• Remedy: A: 1. The connector of the shutter HP sensor (S106) or the stack delivery lower/shutter motor (M122) are disconnected. 2. The wiring of the shutter HP sensor (S106) or the stack delivery lower/shutter motor (M122) are faulty. 3. The shutter HP sensor (S106) is faulty. 4. The stack delivery lower/shutter motor (M122) is faulty. 5. The finisher controller PCB is faulty. B: 1) The shutter home position sensor (PI113) is faulty. 2) The wiring between the finisher controller PCB and stack ejection motor, and between the finisher controller PCB and shutter clutch is faulty. 3) The shutter mechanism is faulty. 4) The stack eject

• Code: E584-8003
• Description: Error in the stack delivery lower/shutter motor(Finisher-A1). The shutter does not come off the shutter close detection sensor when the stack delivery lower/shutter motor has been driven for 3sec.
• Remedy: 1. The connector of the shutter close detection sensor (S148) or the stack delivery lower/shutter motor (M122) are disconnected. 2. The wiring of the shutter close detection sensor (S148) or the stack delivery lower/shutter motor (M122) are faulty. 3. The shutter close detection sensor (S148) is faulty. 4. The stack delivery lower/shutter motor (M122) is faulty. 5. The finisher controller PCB is faulty.