• Code: E584-8004
• Description: Error in the stack delivery lower/shutter motor(Finisher-A1). The shutter close detection sensor does not detect the shutter when the stack delivery lower/shutter motor has been driven for 3sec.
• Remedy: 1. The connector of the shutter close detection sensor (S148) or the stack delivery lower/shutter motor (M122) are disconnected. 2. The wiring of the shutter close detection sensor (S148) or the stack delivery lower/shutter motor (M122) are faulty. 3. The shutter close detection sensor (S148) is faulty. 4. The stack delivery lower/shutter motor (M122) is faulty. 5. The finisher controller PCB is faulty.

• Code: E590-8001
• Description: A. Error in the Punch motor(Finisher-A1) B. Punch home position error(External * Hole Puncher). A. During initialization, the punch HP sensor does not detect the puncher when the punch motor has been driven for 500msec. after the puncher has come off the punch HP sensor. After initialization, the punch motor does not return to home position. B. The puncher does not detect the punch home position sensor when the puncher motor has been driven for 20 msec.
• Remedy: A: 1. The connector of the punch HP sensor (S104) or the punch motor clock sensor (S105) are disconnected. 2. The connector of the punch motor (M102) is disconnected. 3. The wiring of the punch HP sensor (S104) or the punch motor clock sensor (S105) are faulty. 4. The wiring of the punch motor (M102) is faulty. 5. The punch HP sensor (S104) is faulty. 6. The punch motor clock sensor (S105) is faulty. 7. The punch motor (M102) is faulty. 8. The puncher driver PCB (PCB1) is faulty. 9. The finisher controller PCB is faulty. B: 1) The punch home position sensor (PI63) and punch motor clock sensor (PI62) is faulty. 2) The wiring between the punch controller PCB and sensor is faulty. 3) The punch mechanism is faulty. 4) The punch controller PCB is faulty. 5) The finisher controller

• Code: E590-8002
• Description: A. Error in the Punch motor(Finisher-A1) B. Punch home position error(External * Hole Puncher). A. The puncher does not come off the punch HP sensor when the punch motor has been driven for 200msec. The puncher does not come off the punch HP sensor during initialization. B. After the motor has been stopped at time of punch motor initialization, the puncher does not detect punch home position sensor.
• Remedy: A: 1. The connector of the punch HP sensor (S104) or the punch motor clock sensor (S105) are disconnected. 2. The connector of the punch motor (M102) is disconnected. 3. The wiring of the punch HP sensor (S104) or the punch motor clock sensor (S105) are faulty. 4. The wiring of the punch motor (M102) is faulty. 5. The punch HP sensor (S104) is faulty. 6. The punch motor clock sensor (S105) is faulty. 7. The punch motor (M102) is faulty. 8. The puncher driver PCB (PCB1) is faulty. 9. The finisher controller PCB is faulty. B: 1) The punch home position sensor (PI63) and punch motor clock sensor (PI62) is faulty. 2) The wiring between the punch controller PCB and sensor is faulty. 3) The punch mechanism is faulty. 4) The punch controller PCB is faulty. 5) The finisher controller

• Code: E590-8003
• Description: Error in the Punch motor(Finisher-A1). The drive pulse of the punch motor does not reach 100pulses when the punch motor has been driven for 100msec. after the puncher has come off the punch HP sensor.
• Remedy: 1. The connector of the punch HP sensor (S104) or the punch motor clock sensor (S105) are disconnected. 2. The connector of the punch motor (M102) is disconnected. 3. The wiring of the punch HP sensor (S104) or the punch motor clock sensor (S105) are faulty. 4. The wiring of the punch motor (M102) is faulty. 5. The punch HP sensor (S104) is faulty. 6. The punch motor clock sensor (S105) is faulty. 7. The punch motor (M102) is faulty. 8. The puncher driver PCB (PCB1) is faulty. 9. The finisher controller PCB is faulty.

• Code: E591-8001
• Description: Scrap full detection error (External * Hole Puncher). The voltage of the light received is 3.0 V or less even when the light emitting duty of the scrap full detector sensor has been increased to 66% or more.
• Remedy: 1) The wiring between the scrap full detector PCB and punch controller PCB is faulty. 2) The scrap full detector PCB is faulty. 3) The punch controller PCB is faulty. 4) The finisher controller PCB is faulty.

• Code: E591-8002
• Description: Scrap full detection error (External * Hole Puncher). The voltage of the light received is 2.0 V or more even when the light emitting duty of the scrap full detector sensor has been decreased to 0%.
• Remedy: 1) The scrap full detector PCB is faulty. 2) The punch controller PCB is faulty. 3) The finisher controller PCB is faulty.

• Code: E592
• Description: Horizontal registration sensor 3 error(External * Hole Puncher). The voltage of the light received is 2.0 V or more even when the light emitting duty of the horizontal registration sensor 3 (LED3,PTR3) has been decreased to 0%.
• Remedy: 1) The LED PCB and photosensor PCB is faulty. 2) The punch controller PCB is faulty. 3) The finisher controller PCB is faulty.

• Code: E592-8001
• Description: Trailing edge sensor error(External * Hole Puncher). The voltage of the light received is 3.0 V or less even when the light emitting duty of the trailing edge sensor (LED5,PTR5) has been increased to 66% or more.
• Remedy: 1) The wiring between the LED PCB/photosensor PCB and punch controller PCB is faulty. 2) The LED PCB and photosensor PCB is faulty. 3) The punch controller PCB is faulty. 4) The finisher controller PCB is faulty.