• Code: E5F8-8002
• Description: Error in the saddle tapping motor(Finisher-A1). The saddle tapping plate does not come off the saddle paper tapping HP sensor when the saddle tapping motor has been driven for 50pulses.
• Remedy: 1. The connector of the saddle paper tapping HP sensor (S215) or the saddle tapping motor (M213) are disconnected. 2. The wiring of the saddle paper tapping HP sensor (S215) or the saddle tapping motor (M213) are faulty. 3. The saddle paper tapping HP sensor (S215) is faulty. 4. The saddle tapping motor (M213) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.

• Code: E5F9-8001
• Description: Error in the saddle lead-in roller disengage motor(Finisher-A1). The saddle lead-in roller HP sensor does not detect the saddle lead-in roller when the saddle lead-in roller disengage motor has been driven for 50pulses.
• Remedy: 1. The connector of the saddle lead-in roller HP sensor (S222) or the saddle lead-in roller disengage motor (M214) are disconnected. 2. The wiring of the saddle lead-in roller HP sensor (S222) or the saddle lead-in roller disengage motor (M214) are faulty. 3. The saddle lead-in roller HP sensor (S222) is faulty. 4. The saddle lead-in roller disengage motor (M214) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.

• Code: E5F9-8002
• Description: Error in the saddle lead-in roller disengage motor(Finisher-A1). The saddle lead-in roller does not come off the saddle lead-in roller HP sensor when the saddle lead-in roller disengage motor has been driven for 50pulses.
• Remedy: 1. The connector of the saddle lead-in roller HP sensor (S222) or the saddle lead-in roller disengage motor (M214) are disconnected. 2. The wiring of the saddle lead-in roller HP sensor (S222) or the saddle lead-in roller disengage motor (M214) are faulty. 3. The saddle lead-in roller HP sensor (S222) is faulty. 4. The saddle lead-in roller disengage motor (M214) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.

• Code: E602-0001
• Description: Hard disk failure. HDD detection error. In case HDD cannot be detected, not becoming Ready, or returning Error.
• Remedy: 1. Connection of the HDD cable 2. Re-installation of the system 3. HDD 4. Main controller board

• Code: E602-0002
• Description: Hard disk failure. No boot file. In case a program for main CPU does not exist under the /BOOTDEV/BOOT/ on HDD
• Remedy: 1. Re-installation of the system 2. HDD

• Code: E602-0003
• Description: Hard disk failure. HDD WriteAbort error. In case a sector of /BOOTDEV on HDD is not readable
• Remedy: 1. Re-installation of the system 2. HDD

• Code: E602-0006
• Description: Hard disk failure. No SubBootable corresponding to PDL type exists in /BOOTDEV/BOOT
• Remedy: 1. Re-installation of the system 2. HDD

• Code: E602-0007
• Description: Hard disk failure. No ICC profile corresponding to PDL type exists in /BOOTDEV/PDL
• Remedy: 1. Re-installation of the system 2. HDD