• Code: E5F2-8001
• Description: A. Error in the saddle roller guide motor(Finisher-A1) B. Guide home position error(Finisher-B1). A. The saddle roller guide HP sensor does not detect the saddle roller guide when the saddle roller guide has been moved for 20mm by saddle roller guide motor. B. The guide home position sensor does not turn ON when the guide motor has been driven for 700 pulses.
• Remedy: A: 1. The connector of the saddle roller guide HP sensor (S207) or the saddle roller guide motor (M204) are disconnected. 2. The wiring of the saddle roller guide HP sensor (S207) or the saddle roller guide motor (M204) are faulty. 3. The saddle roller guide HP sensor (S207) is faulty. 4. The saddle roller guide motor (M204) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The guide home position sensor (PI13) is faulty. 2) The guide plate drive mechanism is faulty. 3) The guide Motor (M3) is faulty. 4) The saddle stitcher controller PCB is faulty.

• Code: E5F2-8002
• Description: A. Error in the saddle roller guide motor(Finisher-A1) B. Guide home position error(Finisher-B1). A. The saddle roller guide does not come off the saddle roller guide HP sensor when the saddle roller guide motor has been driven for 50pulses. B. The guide home position sensor does not turn OFF when the guide motor has been driven for 50 pulses.
• Remedy: A: 1. The connector of the saddle roller guide HP sensor (S207) or the saddle roller guide motor (M204) are disconnected. 2. The wiring of the saddle roller guide HP sensor (S207) or the saddle roller guide motor (M204) are faulty. 3. The saddle roller guide HP sensor (S207) is faulty. 4. The saddle roller guide motor (M204) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The guide home position sensor (PI13) is faulty. 2) The guide plate drive mechanism is faulty. 3) The guide Motor (M3) is faulty. 4) The saddle stitcher controller PCB is faulty.

• Code: E5F3-8001
• Description: A. Error in the saddle alignment guide motor(Finisher-A1) B. Aligning plate home position error(Finisher-B1). A. The saddle alignment plate HP sensor does not detect the saddle alignment guide when the saddle alignment guide has been moved for 177mm by saddle alignment guide motor. B. The aligning plate home position sensor does not turn ON when the aligning plate motor has been driven for 500 pulses.
• Remedy: A: 1. The connector of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are disconnected. 2. The wiring of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are faulty. 3. The saddle alignment plate HP sensor (S206) is faulty. 4. The saddle alignment guide motor (M202) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The aligning plate home position sensor (PI5) is faulty. 2) The aligning plate drive mechanism is faulty. 3) The aligning motor (M5) is faulty. 4) The saddle stitcher controller PCB is faulty.

• Code: E5F3-8002
• Description: A. Error in the saddle alignment guide motor(Finisher-A1) B. Aligning plate home position error(Finisher-B1). A. The saddle alignment guide does not come off the saddle alignment plate HP sensor when the saddle alignment guide motor has been driven for 50pulses. B. The aligning plate home position sensor does not turn OFF when the aligning plate motor has been driven for 50 pulses.
• Remedy: A: 1. The connector of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are disconnected. 2. The wiring of the saddle alignment plate HP sensor (S206) or the saddle alignment guide motor (M202) are faulty. 3. The saddle alignment plate HP sensor (S206) is faulty. 4. The saddle alignment guide motor (M202) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The aligning plate home position sensor (PI5) is faulty. 2) The aligning plate drive mechanism is faulty. 3) The aligning motor (M5) is faulty. 4) The saddle stitcher controller PCB is faulty.

• Code: E5F4-8001
• Description: A. Error in the saddle stitcher motor(Finisher-A1) B. Stitcher (rear) home position error(Finisher-B1). A. The saddle stitcher HP sensor does not detect the saddle stitcher unit when the saddle stitcher motor has been driven for 480msec. B. The stitching home position sensor does not turn ON when the stitch motor (rear) has been driven backward for 0.5 sec.
• Remedy: A: 1. The connector of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are disconnected. 2. The wiring of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are faulty. 3. The saddle stitcher HP sensor (S223) is faulty. 4. The saddle stitcher motor (M209) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The stitcher home position sensor (rear) (SW5) is faulty. 2) The stitcher (rear) is faulty. 3) The saddle stitcher controller PCB is faulty.

• Code: E5F4-8002
• Description: A. Error in the saddle stitcher motor(Finisher-A1) B. Stitcher (rear) home position error(Finisher-B1). A. The saddle stitcher unit does not come off the saddle stitcher HP sensor when the saddle stitcher motor has been driven for 480msec. B. The stitching home position sensor does not turn OFF when the stitch motor (rear) has been driven forward for 0.5 sec.
• Remedy: A: 1. The connector of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are disconnected. 2. The wiring of the saddle stitcher HP sensor (S223) or the saddle stitcher motor (M209) are faulty. 3. The saddle stitcher HP sensor (S223) is faulty. 4. The saddle stitcher motor (M209) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The stitcher home position sensor (rear) (SW5) is faulty. 2) The stitcher (rear) is faulty. 3) The saddle stitcher controller PCB is faulty.

• Code: E5F5-8001
• Description: A. Error in the saddle trailing edge retainer motor(Finisher-A1) B. Stitcher (front) home position error(Finisher-B1). A. The saddle trailing edge retainer move HP sensor does not detect the saddle trailing edge retainer when the saddle trailing edge retainer has been moved for 96mm by saddle trailing edge retainer motor. B. The stitching home position sensor does not turn ON when the stitch motor (front) has been driven forward for 0.5 sec.
• Remedy: A: 1. The connector of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are disconnected. 2. The wiring of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are faulty. 3. The saddle trailing edge retainer move HP sensor (S219) is faulty. 4. The saddle trailing edge retainer motor (M210) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The stitcher home position sensor (front) (SW7) is faulty. 2) The stitcher (front) is faulty. 3) The saddle stitcher controller PCB is faulty

• Code: E5F5-8002
• Description: A. Error in the saddle trailing edge retainer motor(Finisher-A1) B. Stitcher (front) home position error(Finisher-B1). A. The saddle trailing edge retainer does not come off the saddle trailing edge retainer move HP sensor when the saddle trailing edge retainer motor has been driven for 50pulses. B. The stitching home position sensor does not turn OFF when the stitch motor (front) has been driven backward for 0.5 sec.
• Remedy: A: 1. The connector of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are disconnected. 2. The wiring of the saddle trailing edge retainer move HP sensor (S219) or the saddle trailing edge retainer motor (M210) are faulty. 3. The saddle trailing edge retainer move HP sensor (S219) is faulty. 4. The saddle trailing edge retainer motor (M210) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The stitcher home position sensor (front) (SW7) is faulty. 2) The stitcher (front) is faulty. 3) The saddle stitcher controller PCB is faulty.