• Code: E5F6-8001
• Description: A. Error in the saddle paper push-on plate motor(Finisher-A1) B. Paper pushing plate home position error(Finisher-B1). A. The saddle paper push-on plate HP sensor does not detect the saddle paper push-on plate when the saddle paper push-on plate motor has been driven for 500msec. B. The paper pushing plate home position sensor does not turn ON when the paper pushing plate motor has been driven for 0.5 sec.
• Remedy: A: 1. The connector of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are disconnected. 2. The wiring of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are faulty. 3. The saddle paper push-on plate HP sensor (S218) is faulty. 4. The saddle paper push-on plate motor (M205) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2) The paper pushing plate drive mechanism is faulty. 3) The paper pushing plate motor (M8)

• Code: E5F6-8002
• Description: A. Error in the saddle paper push-on plate motor(Finisher-A1) B. Paper pushing plate home position error(Finisher-B1). A. The saddle paper push-on plate does not come off the saddle paper push-on plate HP sensor when the saddle paper push-on plate motor has been driven for 150msec. B. The paper pushing plate home position sensor does not turn OFF when the paper pushing plate motor has been driven for 150 ms.
• Remedy: A: 1. The connector of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are disconnected. 2. The wiring of the saddle paper push-on plate HP sensor (S218) or the saddle paper push-on plate motor (M205) are faulty. 3. The saddle paper push-on plate HP sensor (S218) is faulty. 4. The saddle paper push-on plate motor (M205) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2) The paper pushing plate drive mechanism is faulty. 3) The paper pushing plate motor (M8)

• Code: E5F6-8003
• Description: A. Saddle paper push-on plate motor clock error(Finisher-A1) B. Paper pushing plate motor clock error(Finisher-B1). A. The drive speed of the saddle paper push-on plate motor is less than 6clocks. B. The number of pulses detected by the paper pushing plate motor clock sensor is 6 pulses or less.
• Remedy: A: 1. The connector of the saddle paper push-on plate motor sensor (S213) or the saddle paper push-on plate motor (M205) are disconnected. 2. The wiring of the saddle paper push-on plate motor sensor (S213) or the saddle paper push-on plate motor (M205) are faulty. 3. The saddle paper push-on plate motor sensor (S213) is faulty. 4. The saddle paper push-on plate motor (M205) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty. B: 1) The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2) The paper pushing plate drive mechanism is faulty. 3) The paper pushing plate motor (M8)

• Code: E5F6-8004
• Description: Pushing position error(Finisher-B1). The paper pushing plate leading edge position sensor does not turn ON when the paper pushing plate motor has been driven for 0.1 sec.
• Remedy: 1) The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2) The paper pushing plate drive mechanism is faulty. 3) The paper pushing plate motor (M8)

• Code: E5F6-8005
• Description: Pushing position error(Finisher-B1). The paper pushing plate leading edge position sensor does not turn OFF when the paper pushing plate motor has been driven for 0.5 sec.
• Remedy: 1) The paper pushing plate home position sensor (PI14), paper pushing plate top position sensor (PI15), and paper pushing plate motor clock sensor (PI1) is faulty. 2) The paper pushing plate drive mechanism is faulty. 3) The paper pushing plate motor (M8)

• Code: E5F7-8001
• Description: Error in the saddle trailing edge retainer motor(Finisher-A1). The saddle trailing edge retainer HP sensor does not detect the saddle trailing edge retainer when the saddle trailing edge retainer motor has been driven for 80pulses.
• Remedy: 1. The connector of the saddle trailing edge retainer HP sensor (S221) or the saddle trailing edge retainer motor (M210) are disconnected. 2. The wiring of the saddle trailing edge retainer HP sensor (S221) or the saddle trailing edge retainer motor (M210) are faulty. 3. The saddle trailing edge retainer HP sensor (S221) is faulty. 4. The saddle trailing edge retainer motor (M210) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.

• Code: E5F7-8002
• Description: Error in the saddle trailing edge retainer motor(Finisher-A1). The saddle trailing edge retainer does not come off the saddle trailing edge retainer HP sensor when the saddle trailing edge retainer motor has been driven for 50pulses
• Remedy: 1. The connector of the saddle trailing edge retainer HP sensor (S221) or the saddle trailing edge retainer motor (M210) are disconnected. 2. The wiring of the saddle trailing edge retainer HP sensor (S221) or the saddle trailing edge retainer motor (M210) are faulty. 3. The saddle trailing edge retainer HP sensor (S221) is faulty. 4. The saddle trailing edge retainer motor (M210) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.

• Code: E5F8-8001
• Description: Error in the saddle tapping motor(Finisher-A1). The saddle paper tapping HP sensor does not detect the saddle tapping plate when the saddle tapping motor has been driven for 50pulses.
• Remedy: 1. The connector of the saddle paper tapping HP sensor (S215) or the saddle tapping motor (M213) are disconnected. 2. The wiring of the saddle paper tapping HP sensor (S215) or the saddle tapping motor (M213) are faulty. 3. The saddle paper tapping HP sensor (S215) is faulty. 4. The saddle tapping motor (M213) is faulty. 5. The saddle stitcher controller PCB is faulty. 6. The finisher controller PCB is faulty.