Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3235 — Trang 6/30

Code: E248-0003

Description: EEPROM error
An error has occurred during read operation following write operation.
Remedy: Replace the reader controller PCB

Code: E261-0000

Description: The zero-cross signal is faulty.
When the relay is on, the zero-cross signal is not detected for 500 msec or more.
Remedy: Replace the AC driver PCB. Replace the DC controller PCB.

Code: E280-0001

Description: Reading unit communication error
Reception status error
Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable

Code: E280-0002

Description: Reading unit communication error
Reception interrupt error
Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable

Code: E280-0003

Description: Reading unit communication error
Insufficient insertion of the reading unit connector
Remedy: Disconnect and then connect the flexible cable. Replace the flexible cable

Code: E315-0007

Description: There is an error in image data.
There is an error in JBIG encoding.
Remedy: Turn off and then back on the power.

Code: E315-000d

Description: There is an error in image data.
There is an error in JBIG decoding.
Remedy: Turn off and then back on the power.

Code: E315-000e

Description: There is an error in image data.
Error in decoding of software
Remedy: Replace the main controller PCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie