Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon iR3235 — Trang 8/30

Code: E315-0511

Description: There is an error in image data.
Device: abnormal termination error [Location to be detected] image process module (SCIP) [Detection timing] when abnormal interruption is detected after the operation has been detected
Remedy: Check connection with DDI-S cable(RCON). Replace the main controller PCB.

Code: E315-0520

Description: There is an error in image data.
Device: timeout error [Location to be detected] image process module (CMIP) [Detection timing] When there is no interruption 2 min after the operation has been started
Remedy: Check connection with DDI-S cable(RCON). Replace the main controller PCB.

Code: E315-0521

Description: There is an error in image data.
Device: abnormal termination error [Location to be detected] image process module (CMIP) [Detection timing] when abnormal interruption is detected after the operation has been detected
Remedy: Check connection with DDI-S cable(RCON). Replace the main controller PCB

Code: E315-0530

Description: There is an error in image data.
Device: timeout error [Location to be detected] image process module (JPEN) [Detection timing] when there is no interruption 2 min after the operation has been started.
Remedy: Turn OFF and then ON the power. Replace the main controller PCB if this occurs frequently.

Code: E315-0531

Description: There is an error in image data.
Device: abnormal termination error [Location to be detected] image process module (JPEN) [Detection timing] when abnormal interruption is detected after the operation has been started.
Remedy: Turn OFF and then ON the power. Replace the main controller PCB if this occurs frequently.

Code: E315-0540

Description: There is an error in image data.
Device: timeout error [Location to be detected] image process module (JPDE) [Detection timing] when there is no interruption 2 min after the operation has been started.
Remedy: Turn OFF and then ON the power. Replace the main controller PCB if this occurs frequently.

Code: E315-0541

Description: There is an error in image data.
Device: abnormal termination error [Location to be detected] image process module (JPDE) [Detection timing] when abnormal interruption is detected after the operation has been started
Remedy: Turn OFF and then ON the power. Replace the main controller PCB if this occurs frequently.

Code: E315-0550

Description: There is an error in image data.
Device: timeout error [Location to be detected] image process module (PRIP) [Detection timing] when there is no interruption 2 min after the operation has been started.
Remedy: Check connection with DDI-P cable(DCON). Replace the main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie