• Code: E005-0001
• Description: There is no fixing web/there is an error in the detection of web solenoid connection.
  At power-on, the connection of the web solenoid is not detected.
• Remedy: - Check the connector for any fault in connection. - Replace the solenoid.

• Code: E005-0010
• Description: There is no fixing web/there is an error in the detection of web solenoid connection.
  The power has been turned off and then back on without resetting the error.
• Remedy: - Reset the fixing web counter. (COPIER>COUNTER>MISC>FIX-WEB)

• Code: E010-0000
• Description: There is a feed motor error.
  The FG signal of the feed motor does not arrive for 2 sec or more even when the feed motor has been turned on.
• Remedy: - Check the connector for any fault in connection. - Replace the motor

• Code: E012-0000
• Description: There is a drum motor error.
  The FG signal of the drum motor does snot arrive for 2 sec or more even when the drum motor has been turned on.
• Remedy: - Check the connector for any fault in connection. - Replace the motor.

• Code: E013-0000
• Description: The waste toner pipe is clogged.
  The waste toner pipe is identified as being clogged for 4 sec or more.
• Remedy: - Check the connector for any fault in connection. - Replace the waste toner feedscrew lock detecting switch. - Replace the waste toner feed unit. - Replace the DC controller PCB.

• Code: E013-0010
• Description: The waste toner pipe is clogged.
  The power has been turned off and then back on without resetting the error.
• Remedy: - Check the connector for any fault in connection. - Replace the waste toner feedscrew lock detecting switch. - Replace the waste toner feed unit. - Replace the DC controller PCB.

• Code: E014-0000
• Description: There is a fixing motor error.
  The Phase lock signal of the fixing motor does not arrive for 2 sec even when the fixing motor has been turned on.
• Remedy: - Check the connector for any fault in connection. - Replace the motor.

• Code: E020-0000
• Description: There is no toner in the developing assembly; there is an error in the detection of developing toner sensor connection; there is an error in the detection of hopper toner sensor connection.
  The presence of toner is detected inside the sub hopper and, in addition, the absence of toner is detected inside developing assembly for 120 sec continuously even when operation has been under way for the supply of toner to the developing assembly.
• Remedy: - Check the connector of the developing toner sensor for any fault in connection. - Replace the developing toner sensor. - Replace the hopper toner sensor.