Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Canon NP8580 — Trang 2/3

Code: E210

Description: When the LENS HOME POSITION signal (LHP) is not generated within 4.8 seconds after the power switch or door switch goes ON. When the LENS HOME POSITION signal (LHP) is generated for 2 seconds or more.

Code: E243

Description: When an abnormally in communication occurs between the microprocessors on the DC controller PCB and those on the control panel PCB.

Code: E400

Description: When an abnormality in communication occurs between the DC controller PCB detect RDF controller PCB.

Code: E401

Description: When a flag mounted on the pick-up roller HOME position sensor (S3), it indicates that M1 is turning. S3 should go ON and OFF two or more times in one second.

Code: E402

Description: The number of pulses in a 200 ms period is too low.

Code: E403

Description: When the number of feed motor clock pulses in a 200 ms period is less than the correct value.

Code: E411

Description: When the sensor output is greater than 2.3V when there is paper.

Code: E500

Description: When an abnormality in communication occurs between the DC controller PCB of sorter detect main controller PCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie