Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Epson AcuLaser C9200N — Trang 11/11

Code: E704

Description: Optional Cassette2 Elevator failure
- The Lift-Up Sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
Causes: • Lift-up Sensor (PC7-PC) • Lift-up Sensor (PC7-PC) • Control Board (PWB-Z-PC)
Remedy: 1 Check the M3-PC connector for proper connection and correct as necessary. - - 2 Check the connector of M3-PC for proper drive coupling and correct as necessary. - - 3 PC7-PC I/O check, Sensor check PWB-Z PJ6Z PC-3 (ON) PWB-Z PJ4Z PC-4 to 5 V-21 to 22 4 M3-PC operation check Q-24 5 Change PWB-Z-PC.

Code: E900

Description: Flash ROM write error
- Flash ROM writing is found faulty during a check.
Causes: Mechanical Control Board (PWB-M)
Remedy: 1 Change PWB-M. - - 2 Contact the service support section counter since the error is beyond restoration in the field.

Code: E901

Description: RTC failure
- The correct access to the RTC Board is failed during access.
Causes: • RTC Board (PWB-R) • Mechanical Control Board (PWB-M)
Remedy: 1 Check the connector for proper connection and correct as necessary. - - 2 Change PWB-R - - 3 Change PWB-M

Code: E998

Description: Engine communication error
- The correct access between the Controller Board and the Mechanical Control Board are failed during access.
Causes: • Controller Board (PWB-P) • Mechanical Control Board (PWB-M)
Remedy: 1 Check the PWB-P connector for proper connection and correct as necessary. - - 2 Check the PWB-M connector for proper connection and correct as necessary. 3 Change PWB-P - - 4 Change PWB-M
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie