• Code: 58.XX
• Display: 58.XX ERROR
• Description: A temporary printing error has occurred.
• Remedy: Turn the product off, and then turn the product on.

• Code: 59.00
• Display: 59.00 ERROR
• Description: The toner residual feed motor (M12) is defective.
• Remedy: 1. Perform a motor test to check for a motor failure. 2. Reconnect J89 of the residual feed motor, intermediate connectors (J75 and J77), and J137 on the DC controller PCA. 3. If the problem persists, replace the residual feed motor (M12).

• Code: 59.30
• Display: 59.30 ERROR
• Description: The fuser motor (M2) has experienced a startup error.
• Remedy: 1. Perform the fuser motor component test in the DIAGNOSTICS menu. 2. Reconnect the connector on the DC controller PCA (J117). 3. If the problem persists, replace the fuser motor (M2).

• Code: 59.40
• Display: 59.40 ERROR
• Description: The fuser motor (M2) has experienced a rotational error.
• Remedy: 1. Perform the fuser motor component test in the DIAGNOSTICS menu. 2. Reconnect the connectors J117 on the DC controller PCA. 3. If the problem persists, replace the fuser motor (M2).

• Code: 59.5Y
• Display: 59.5Y ERROR
• Description: A drum motor has experienced a startup error.
  • Y=0: Black (drum motor 3) (M5) (J121) • Y=1: Cyan (drum motor 2) (M4) (J120) • Y=2: Magenta (drum motor 1) (M3) (M4) (J120) • Y=3: Yellow (drum motor 1) (M3) (J120)
• Remedy: 1. Perform the drum-motors component test in the DIAGNOSTICS menu. 2. Reconnect the connectors J120 or J121 on the DC controller PCA. 3. Replace the appropriate drum motor.

• Code: 59.6Y
• Display: 59.6Y ERROR
• Description: A drum motor has experienced a rotational error.
  • Y=0: Black (drum motor 3) (M5) (J121) • Y=1: Cyan (drum motor 2) (M4) (J120) • Y=2: Magenta (drum motor 1) (M3) (M4) (J120) • Y=3: Yellow (drum motor 1) (M3) (J120)
• Remedy: 1. Perform the drum-motors component test in the DIAGNOSTICS menu. 2. Reconnect the connectors J120 or J121 on the DC controller PCA. 3. Replace the appropriate drum motor.

• Code: 59.B0
• Display: 59.B0 ERROR
• Description: The toner-collection unit is full.
• Remedy: Replace the toner-collection unit.

• Code: 59.BO
• Display: 59.BO CLEANING MOTOR ERROR REPLACE TONER COLLECTION UNIT
• Description: This message displays for one of the following reasons:
  • The cleaning motor is stuck. • The toner-collection unit is full. • The chute at the top of the toner collection unit is clogged.
• Remedy: Replace the toner-collection unit