Code :

Code: 25.8:10
Description: Malfunction or sensor failure
Causes: A PIP glitch or a presence error has been detected. Automatic diagnostic should discard if it's a recoverable failure or not
Remedy: Service engineer: • Replace the PIP.

Code: 26.01:10
Description: Broken Bag. M (PIP 1)
Causes: Magenta Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bagh Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.02:10
Description: Broken Bag. LM (PIP 2)
Causes: Light Magenta Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bagh Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.03:10
Description: Broken Bag. LC (PIP 3)
Causes: Light Cyan Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bagh Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.04:10
Description: Broken Bag. C (PIP 4)
Causes: Cyan Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bagh Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.05:10
Description: Broken Bag. OP (PIP 5)
Causes: Optimizer Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bag Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.06:10
Description: Broken Bag. Y (PIP 6)
Causes: Yellow Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bag Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.

Code: 26.07:10
Description: Broken Bag. K (PIP 7)
Causes: Black Ink Cartridge: A broken bag has been detected in the ink cartridge. This error must be solved and the printer checked and cleared of this error code before the printer can resume printing.
Remedy: 1. Remove the ink cartridge and check for any ink leaking from the cartridge. In some extreme cases: • Ink can leak from the damaged ink cartridge and contaminate the pressurized air system, or; • Air can get inside the Ink System causing bubbles in the Ink Tubes, which can damage the printheads. 2. For this issue perform the h3.3.2 Recover Broken Bag Diagnostic procedure. 3. If the ISS Bottom PCA has been damaged by ink, and cannot be repaired; it must be replaced.