Description: Firmware version mismatch between the OMAS Controller Card and Hard Disk Drive
Causes: FW mismatch.
Remedy: Call agent: • Check that the printer has the latest firmware version. If not, update the firmware to the latest version. Service engineer: • Replace the OMAS Controller Card.
Description: Advisory fw error in DSP or Engine code of the substrate advance sensor component
Causes: FW mismatch.
Remedy: Call agent: • Check that the printer has the latest firmware version. If not, update the firmware to the latest version. Service engineer: • Replace the OMAS Controller Card.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check that the Drop Detector cable is not damaged and is correctly connected to the Service Station cable. 2. Check that the Service Station cable is not damaged and is correctly connected to the Interconnect PCA. 3. Replace the Drop Detector. See Drop detector. 4. If the System Error continues, replace the Interconnect PCA . See Interconnect PCA. 5. Replace the PrintMech PCA. See PrintMech PCA.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check that Line sensor is properly connected to Carriage PCA. 2. Replace the Line Sensor. See Line sensor assembly.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Restart the printer. 2. Clean the Line Sensor. 3. Replace the Line sensor. See Line sensor assembly.
Description: Incorrect readings from substrate encoder
Causes: Incorrect readings from substrate encoder.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Perform Substrate Drive diagnostics. 2. Replace the Encoder Disc and Sensor. See Encoder disc and sensor.
Remedy: Call agent: • Restart the printer. Service engineer: 1. Check that the Color sensor is installed in the Carriage. 2. Check that the Color sensor is correctly installed and screwed into place. 3. Check that the Color sensor cable is not damaged. 4. Check that the Color sensor cable is correctly connected to the Carriage PCA. 5. If the system error persists, replace the Color sensor. 6. Perform a Color sensor basic test (CLC), to ensure that the replaced part is working correctly.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.