• Code: 58.11:10
• Description: Color sensor Communication error
• Causes: Color sensor Communication error.
• Remedy: Call agent: • Restart the printer. Service engineer: 1. Check that the Color sensor is installed in the Carriage. 2. Check that the Color sensor is correctly installed and screwed into place. 3. Check that the Color sensor cable is not damaged. 4. Check that the Color sensor cable is correctly connected to the Carriage PCA. 5. If the system error persists, replace the Color sensor. 6. Perform a Color sensor basic test (CLC), to ensure that the replaced part is working correctly.

• Code: 58.12:10
• Description: Color sensor Command error
• Causes: Default S/N found in main and backup NVM.
• Remedy: Call agent: • Restart the printer. Service engineer: 1. Check that the Color sensor is installed in the Carriage. 2. Check that the Color sensor is correctly installed and screwed into place. 3. Check that the Color sensor cable is not damaged. 4. Check that the Color sensor cable is correctly connected to the Carriage PCA. 5. If the system error persists, replace the Color sensor. 6. Perform a Color sensor basic test (CLC), to ensure that the replaced part is working correctly.

• Code: 58.13:10
• Description: Color sensor Calibration error
• Causes: Color sensor Calibration error.
• Remedy: Service engineer: 1. Check that the Color sensor is installed in the Carriage. 2. Check that the Color sensor is correctly installed and screwed into place. 3. Check that the Color sensor cable is not damaged. 4. Check that the Color sensor cable is correctly connected to the Carriage PCA. 5. If the system error persists, replace the Color sensor. 6. Perform a Color sensor basic test (CLC), to ensure that the replaced part is working correctly.

• Code: 58.1:10
• Description: Color sensor Shutter Actuator failure
• Causes: Color sensor Shutter Actuator failure.
• Remedy: Call agent: • Restart the printer. Service engineer: 1. Replace the Color sensor Shutter Actuator Assembly. 2. Perform the Color sensor Shutter Diagnostic Test to ensure that there is no other problem preventing shutter operation. 3. Perform a Color sensor basic test (CLC) to ensure that the replaced part is working correctly.

• Code: 58.2:10
• Description: Color sensor Shutter Deactivator failure
• Causes: The Color sensor Shutter Deactivator fail.
• Remedy: Service engineer: 1. Check that the Shutter Deactivator is correctly screwed into place. 2. Perform the Color sensor Shutter Diagnostic Test to ensure that there is no other problem preventing shutter operation. 3. Perform a Color sensor basic test (CLC) to ensure that the replaced part is working correctly.

• Code: 58:01
• Description: Color sensor shutter error
• Causes: Color sensor shutter error.
• Remedy: Call agent: • Restart the printer. Service engineer: • Execute the Color Sensor Diagnostic Test.

• Code: 58:04
• Description: Firmware of the printer is incompatible with that of the Color Sensor
• Causes: Firmware of the printer is incompatible with that of the Color Sensor.
• Remedy: Call agent: • Restart the printer. Service engineer: • Replace the Color Sensor. See Color sensor assembly.

• Code: 59.1:09
• Description: Default S/N found in main and backup NVM
• Causes: Default S/N found in main and backup NVM.
• Remedy: Service engineer: • Replace one part at a time, and restart the printer before replacing another.