• Code: 15.32:10
• Description: PZ resistor 2: Cable or resistor shortcircuit
• Causes: Cable or resistor shortcircuit.
• Remedy: Service engineer: • Check the PZ resistor 2 or cable shortcircuit.

• Code: 15.33:10
• Description: PZ resistor 3: Cable or resistor shortcircuit
• Causes: Cable or resistor shortcircuit.
• Remedy: Service engineer: • Check the PZ resistor 3 or cable shortcircuit.

• Code: 15.41:11
• Description: PZ resistor 1: Not connected
• Causes: PZ Heaters Cable PZ Resistor 1 Air Curtain and Printzone Heaters Control PCA.
• Remedy: • Restart the printer. Service engineer: 1. Reseat/Replace Air Curtain and Printzone Heaters Control PCA to PZ Heaters cable. 2. Reseat/Replace PZ Resistor 1.

• Code: 15.42:11
• Description: PZ resistor 2: Not connected
• Causes: PZ resistor 2 disconnected or damaged.
• Remedy: Call agent: • Restart the printer. Service engineer: • Check that PZ 2 resistor is properly connected. If it is, then replace PZ 2 resistor.

• Code: 15.43:11
• Description: PZ resistor 3: Not connected
• Causes: PZ resistor 3 disconnected or damaged.
• Remedy: Call agent: • Restart the printer. Service engineer: • Check that PZ 3 resistor is properly connected. If it is, then replace PZ 3 resistor.

• Code: 15.51:03
• Description: PZ resistor 1: Out of range
• Causes: Resistor out of range.
• Remedy: Service engineer: • Measure the PZ 1 resistance. Replace in case of resistance out of range.

• Code: 15.52:03
• Description: PZ resistor 2: Out of range
• Causes: Resistor out of range.
• Remedy: Service engineer: • Measure the PZ 2 resistance. Replace in case of resistance out of range.

• Code: 15.53:03
• Description: PZ resistor 3: Out of range
• Causes: Resistor out of range.
• Remedy: Service engineer: • Measure the PZ 3 resistance. Replace in case of resistance out of range.