Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP Latex 330 — Trang 9/32

Code: 14.81:10

Description: Curing power regulator current too high
Causes: Heaters, Heater Control.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. Check heaters with a tester and replace heaters if necessary (shortcut). 3. Replace the Heater Control.

Code: 14.82:10

Description: Curing power regulator shortcut
Causes: Heaters, Heater Control.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. Check heaters with a tester and replace heaters if necessary (shortcut). 3. Replace the Heater Control.

Code: 14.83:11

Description: Curing power regulator open circuit
Causes: Heater Control to Curing Power Interconnect PCA Cable. Curing Power Interconnect PCA Curing Cable. Curing Resistor.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. Reseat/Replace the Heater Control to Curing Power Interconnect PCA Cables. 3. Reseat/Replace Curing Power Interconnect PCA Curing Cable. 4. Reseat/Replace all Curing Resistors connectors.

Code: 14.87:10

Description: Curing power regulator OverTemp
Causes: Power regulator OverTemp.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. If the SE appears frequently, replace the Heater Control.

Code: 14.88:10

Description: Curing power regulator overvoltage or shortcut
Causes: Regulator overvoltage or shortcut.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. Check resistor module values, If they are ok, check installation.

Code: 14.89:10

Description: Curing power regulator relay damaged
Causes: Heater Control.
Remedy: Service engineer: 1. Run Service "Curing system monitor". 2. Replace de Heater Control.

Code: 15.20:10

Description: Cable or Resistor shortcircuit from any PZ or vapor resistor
Causes: Shortcircuit from Any PZ or vapor resistor.
Remedy: Service engineer: • Check the PZ resistors, the Vapor resistors, or cable shortcircuits. Replace the affected part.

Code: 15.31:10

Description: PZ resistor 1: Cable or resistor shortcircuit
Causes: Cable or resistor shortcircuit.
Remedy: Service engineer: • Check the PZ resistor 1 or cable shortcircuit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie