Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 42 — Trang 7/8

Code: B116

Description: Communication error with the fax board
An undefined communication error occurs between the controller and the fax board.
Remedy: 1 Check the connector CN106 on MFPB for proper connection and correct as necessary. 2 Change FAXB. 3 Change MFPB.

Code: C023

Description: Flash ROM error
A SSD board (SSDB) failure occurs.
Remedy: 1 Reboot the main unit. 2 Check the SSD board (SSDB) for proper connection and correct as necessary. 3 Change MFPB.

Code: C026

Description: Controller ROM error (Access error)
Flash ROM access error is detected during the main unit starting.
Remedy: 1 Reboot the main unit. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C027

Description: Controller ROM error (Data error)
• Final check sum error is detected during the main unit starting. • When the main unit is started, a malfunction is detected in state confirmation process of the loadable driver.
Remedy: 1 Reboot the main unit. 2 Check the MFPB connector for proper connection and correct as necessary. 3 If this error message is displayed after update of firmware, conduct the firmware update procedures again. 4 Change MFPB.

Code: C050

Description: HDD access error
When correct access to the hard disk kit (HDD) is failed during access.
Remedy: 1 Reboot the main unit. 2 Check the connector between HDD-MFPB CN7, CN5 for proper connection and correct as necessary. 3 Change HDD. 4 Change MFPB.

Code: C051

Description: HDD full error
Range for user space is full during access to the hard disk kit.
Remedy: 1 Reboot the main unit. 2 Delete the job hold in [PS/PCL PRINT] - [PROOF/PRINT MENU] to increase the available range for user space. 3 Check the connector between HDD-MFPB CN7, CN5 for proper connection and correct as necessary. 4 Format HDD with [Admin Settings] - [HDD Format]. 5 Change HDD.

Code: C060

Description: Firmware update error
Firmware update fails to complete correctly during update.
Remedy: 1 Reboot the main unit. 2 Check the cable that has been used for update of the firmware for proper connection and correct as necessary. 3 Check the firmware update file and if the file is not the correct one, update the firmware again. 4 Check the firmware update procedure and if the procedure is not correct, update the firmware again. 5 Update the firmware again. 6 Check the MFPB connector for proper connection and correct as necessary. 7 Change MFPB.

Code: C072

Description: Counter not installed
The total counter (CNT) is not installed.
Remedy: 1 Reboot the main unit. 2 Check the connector between CNT-PRCB CN15 for proper connection and correct as necessary. 3 Change PRCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie