Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 42 — Trang 8/8

Code: C073

Description: Finisher not connected
Connection status error for the finisher FS-529 is occurred.
Remedy: 1 Check the connection status of the finisher FS-529, and modify as necessary. 2 Change FSCB. 3 Change PRCB.

Code: C074

Description: Engine ROM error
ROM on the printer control board has error.
Remedy: ROM on the printer control board has error.

Code: C075

Description: Large Paper Size Kit error
The installed large paper size kit is not compatible with the marketing area for which the MFP board is destined.
Remedy: 1 Install the large paper size kit appropriate for the marketing area. 2 Change MFPB.

Code: C076

Description: Copy Kit Counter error
The current count value of the copy kit counter reaches the setting configured in [Max. Allowance Set].
Remedy: 1 Increase the setting configured in [Max. Allowance Set] and turn the power switch OFF and ON. I.10.6 Copy Kit Counter 2 If the copy kit counter is not used, change the copy kit counter count setting to mode 1 and then turn the power switch OFF and ON. I.10.5 Copy Kit Counter Count 3 Change MFPB.

Code: C080

Description: Memory error
The failure of the RAM on the MFP board occurs.
Remedy: 1 Reboot the main unit.2 Change MFPB

Code: FFFF

Description: Interface communication error
Correct communication is failed when receiving/sending the command between PRCB and MFPB.
Remedy: 1 Reboot the main unit. 2 Check the MFPB connector for proper connection and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary 4 Change connecting cable between MFPB and PRCB. 5 Change PRCB. 6 Change MFPB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie