• Code: 0900
• Description: Tray 4 lift-up failure (PC-211)
  • The tray 4 upper limit sensor (PS43) is not blocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
• Remedy: 1 Check the connector between M43-PCCB CN4 for proper connection and correct as necessary. 2 Check the connector between M53-PCCB CN8 for proper connection and correct as necessary. 3 Check the connector between PS43-relay CN18-PCCB CN6 for proper connection and correct as necessary. 4 Check the connector between PS53-relay CN18-PCCB CN10 for proper connection and correct as necessary. 5 Check the connector of each motor for proper drive coupling, and correct as necessary. 6 PS43 I/O check, sensor check 7 PS53 I/O check, sensor check 8 M43 operation check 9 M53 operation check 10 Change PCCB 11 Change PRCB

• Code: 0910
• Description: Tray 3 feeder up/down abnormality
  The paper feed tray 3 upper limit sensor (PS10) is not blocked even after the lapse of a given period of time after the lifting motion has been started.
• Remedy: 1 Check the connector between M5-PRCB CN11 for proper connection and correct as necessary. 2 Check the connector of M5 for proper drive coupling and correct as necessary. 3 Check the connector between PS10-relay CN6-PRCB CN14 for proper connection and correct as necessary. 4 PS10 I/O check, sensor check 5 M5 operation check 6 Change M5 7 Change PRCB

• Code: 0920
• Description: Tray 2 feeder up/down abnormality
  The paper feed tray 2 upper limit sensor (PS3) is not blocked even after the lapse of a given period of time after the lifting motion has been started.
• Remedy: 1 Check the connector between M4-PRCB CN12 for proper connection and correct as necessary. 2 Check the connector of M4 for proper drive coupling and correct as necessary. 3 Check the connector between PS3-relay CN1-PRCB CN13 for proper connection and correct as necessary. 4 PS3 I/O check, sensor check 5 M4 operation checksor check 6 Change M4 7 Change PRCB

• Code: 0950
• Description: Tray 5 lift-up failure (PC-211)
  • The tray 5 upper limit sensor (PS53) is not blocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
• Remedy: 1 Check the connector between M43-PCCB CN4 for proper connection and correct as necessary. 2 Check the connector between M53-PCCB CN8 for proper connection and correct as necessary. 3 Check the connector between PS43-relay CN18-PCCB CN6 for proper connection and correct as necessary. 4 Check the connector between PS53-relay CN18-PCCB CN10 for proper connection and correct as necessary. 5 Check the connector of each motor for proper drive coupling, and correct as necessary. 6 PS43 I/O check, sensor check 7 PS53 I/O check, sensor check 8 M43 operation check 9 M53 operation check 10 Change PCCB 11 Change PRCB

• Code: 0960
• Description: Tray 1 feeder up/down abnormality
  • Paper does not unblock the tray 1 lift-up position sensor (PS20) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The tray 1 lift-up position sensor (PS20) is not blocked even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
• Remedy: 1 Check the connector between M1-PRCB CN3 for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 Check the connector between PS20-PRCB CN9 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN99-relay CN15- PRCB CN9 for proper connection and correct as necessary. 5 PS20 I/O check, sensor check 6 SD1 operation check 7 M1 operation check 8 Change M1 9 Change PRCB

• Code: 0B05
• Description: Malfunctioning of belt up/down movement (FS-529)
  • The belt position sensor (PS13) is not turned OFF after the set period of time has elapsed after the belt retract solenoid (SD5) is turned ON. • The belt position sensor (PS13) is not turned ON after the set period of time has elapsed after the conveyance motor/1 (M5) is turned ON.
• Remedy: 1 Check the connector between M5-FSCB CN17 for proper connection and correct as necessary. 2 Check the connector between SD5-FSCB CN19 for proper connection and correct as necessary. 3 Check the connector between PS13-FSCB CN7 for proper connection and correct as necessary. 4 Check the connector of M5 for proper drive coupling, and correct as necessary. 5 PS13 I/O check, sensor checkheck 6 M5 operation check 7 Change M5 8 SD5 operation check 9 Change SD5 10 Change FSCB

• Code: 0B20
• Description: Stapler movement drive malfunction (FS-529)
  During the home position search, the stapler home sensor (PS11) is not turned ON or OFF even after the set period of time has elapsed after the stapler movement motor (M7) is turned ON.
• Remedy: 1 Check the connector between M7-FSCB CN18 for proper connection and correct as necessary. 2 Check the connector between PS11-FSCB CN7 for proper connection and correct as necessary. 3 Check the connector of M7 for proper drive coupling, and correct as necessary. 4 PS11 I/O check, sensor check 5 M7 operation check 6 Change M7 7 Change FSCB

• Code: 0B30
• Description: Alignment plate R drive malfunction (FS-529)
  The alignment plate home sensor/R (PS9) is turned neither ON nor OFF even after the set period of time has elapsed after the alignment motor/R (M4) is turned ON.
• Remedy: 1 Check the connector between M4-FSCB CN14 for proper connection and correct as necessary. 2 Check the connector between PS9-FSCB CN6 for proper connection and correct as necessary. 3 Check the connector of M4 for proper drive coupling, and correct as necessary. 4 PS9 I/O check, sensor check 5 M4 operation check 6 Change M4 7 Change FSCB