Description: Color Developing Motor's turning at abnormal timing
• The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
Description: Cleaning Brush Motor failure to turn
• The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
Remedy: 1 Check the M22 connector for proper connection and correct as necessary. 2 Check M22 for proper drive coupling and correct as necessary. 3 Check the PWB-MC connector for proper connection and correct as necessary. PWB-MC PJ2MC-9 (DC24 V) H-2. 4 M22 operation check PWB-MC PJ37MC-3 (REM) PWB-MC PJ37MC-6 (LOCK) K-3. 5 Change PWB-M.
Description: Cleaning Brush Motor's turning at abnormal timing
• The Motor Lock signal remains LOW for a predetermined continuous period of time while the Motor remains stationary.
Description: Toner Suction Fan Motor/K’s failure to turn
• The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning.
Remedy: 1 Check the M23 connector for proper connection and correct as necessary. 2 Check M23 for proper drive coupling and correct as necessary. 3 M23 operation check PWB-MC PJ15MC-10 (REM) PWB-MC PJ15MC-12 (LOCK) C to D-21. 4 Change PWB-MC.
Description: Toner Suction Fan Motor’s failure to turn
•The Fan Lock signal remains HIGH for a predetermined continuous period of time while the Motor remains stationary.
Remedy: 1 Check the M20 connector for proper connection and correct as necessary. 2 Check M20 for proper drive coupling and correct as necessary. 3 M20 operation check PWB-MC PJ15MC-1 (REM) PWB-MC PJ15MC-3 (LOCK) C to D- 20 to 21. 4 Change PWB-MC.
Description: New Transfer Belt Unit resetting failure
• A new installation is not detected when a new Transfer Cleaner Unit (Image Transfer Belt Unit) is installed.
Description: Abnormally low toner density detected Cyan TCR Sensor
• T/C 0.21 % or less is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy: 1 Perform image troubleshooting procedure if image density is low. 2 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty 3 Correct the TCR Sensor spring moving part if faulty. 4 Clean the TCR Sensor LED if dirty. 5 Change TCR Sensor C/M/Y. 6 M3, M4 operation check PWB-MC PJ8MC-1 to 4 PWB-MC PJ8MC-5 to 8. 7 Change Imaging Unit. 8 Change PWB-MC. 9 Change PWB-MFPC.
Description: Abnormally high toner density detected Cyan TCR Sensor
• T/C 15.5 % or more is detected ten consecutive times in the Developing Unit as validated through the toner replenishing amount determination control.
Remedy: 1 Clean the TCR Sensor window on the underside of the Imaging Unit if dirty 2 Clean the TCR Sensor LED if dirty. 3 Correct the contact and/or WIRING of the TCR Sensor if faulty. 4 Change TCR Sensor C/M/Y. 5 Change Imaging Unit. 6 Change PWB-MC. 7 Change PWB-MFPC.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.