• Code: C0001
• Description: LCT connection failed
• Remedy:

• Code: C0102
• Description: LCT vertical transport motor malfunction
• Remedy:

• Code: C0204
• Description: Tray 2 elevator failure
  • The lift-up sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.
• Remedy: 1 Check the M101 connector for proper connection and correct as necessary. 2 Check the connector of M101 for proper drive coupling and correct as necessary. 3 PC115 I/O check PWB-Z PJ6Z-3 (ON) T to U-26. 4 M101 operation check PWB-Z PJ4Z-4 to 5 M-24. 5 Change PWB-Z.

• Code: C0206
• Description: Tray 3 elevator failure
• Remedy:

• Code: C0208
• Description: Tray 4 elevator failure
• Remedy:

• Code: C0209
• Description: LCT elevator motor malfunction (elevator malfunction)
• Remedy:

• Code: C0210
• Description: LCT ascent motion failure
• Remedy:

• Code: C0211
• Description: Manual tray rise descent error
  • The bypass lift-up sensor is not blocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started. • The bypass lift-up sensor is not unblocked even when the tray 2 vertical transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started.
• Remedy: 1 Check the M103 connector for proper connection and correct as necessary. 2 Check the connector of M103 for proper drive coupling and correct as necessary. 3 PC115 I/O check PWB-Z PJ7Z<A>-11 (ON) T to U-25 4 M103 operation check PWB-Z PJ5Z-5 to 8 T to U-22 5 Change PWB-Z.