• Code: C-1267
• Description: Horizontal conveyance motor (M2) rotation abnormality. Rotation abnormality detected continuously for the specified time during M2 operation. 34-4
• Causes: Horizontal conveyance motor (M2: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the horizontal conveyance section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 7-D 5 Replace M2. - 6 Replace SDDB. - 7 Replace SDCB.

• Code: C-1268
• Description: Folding entrance motor (M3) rotation abnormality. Rotation abnormality detected continuously for the specified time during M3 operation. 34-0/1/2/ 3
• Causes: Folding entrance motor (M3: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the folding entrance section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 9-D 5 Replace M3. - 6 Replace SDDB. - 7 Replace SDCB.

• Code: C-1269
• Description: Folding conveyance motor (M4) rotation abnormality. Rotation abnormality detected continuously for the specified time during M4 operation. 34-0/1/2/ 3
• Causes: Folding conveyance motor (M4: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the folding conveyance section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 9-D 5 Replace M4. - 6 Replace SDDB. - 7 Replace SDCB.

• Code: C-1270
• Description: Bundle exit motor (M5) rotation abnormality. Rotation abnormality detected continuously for the specified time during M5 operation. 34-0/1/3
• Causes: Bundle exit motor (M5: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the bundle exit section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 22-D 5 Replace M5. - 6 Replace SDDB. - 7 Replace SDCB.

• Code: C-1271
• Description: Folding sub scan alignment exit motor (M8) rotation abnormality. Rotation abnormality detected continuously for the specified time during M8 operation. 34-0/1/2/ 3
• Causes: Folding sub scan alignment exit motor (M8: SD-506) SD drive board (SDDB: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the folding sub scan alignment exit section, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDDB and the motor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 10-D 5 Replace M8. - 6 Replace SDDB. - 7 Replace SDCB.

• Code: C-1272
• Description: Paddle motor (M33) rotation abnormality. Rotation abnormality detected continuously for the specified time during M33 operation. 34-3
• Causes: Trimmer paddle motor (M33: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the trimmer paddle, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDCB and the motor, and repair it if any abnormality. - 3 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 11-W 4 Replace M33. - 5 Replace SDCB.

• Code: C-1273
• Description: Trimmer edge upper limit abnormality. The trimmer blade upper limit sensor (PS62) does not turn ON even after a specified period of time after the trimmer blade motor (M31) starts the home position search operation. 34-3
• Causes: Trimmer completion sensor (PS62: SD-506) Trimmer blade motor (M31: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the trimmer blade upper limit, and clean/repair it if any abnormality. - 2 Check the connector connection and the wiring between SDCB and motor/sensor, and repair it if any abnormality. - 3 Check the connector connection and the wiring between SDDB and SDCB, and repair it if any abnormality. - 4 Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. SD-506: 22-R 5 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 10-U 6 Replace PS62. - 7 Replace M31. - 8 Replace SDDB. - 9 Replace SDCB.

• Code: C-1275
• Description: Trimmer edge drive wire abnormality. The wire slack sensor (PS62) detected the slack of the trimmer edge drive wire. 34-3
• Causes: Wire slack prevention sensor (PS66: SD-506) SD control board (SDCB: SD-506)
• Remedy: 1 Check the wire slack, and repair the trimmer blade if any abnormality. - 2 Check the connector connection and the wiring between SDCB and the sensor, and repair it if any abnormality. - 3 Check I/O and the operation of the sensor, and repair/replace it if any abnormality. SD-506: 10-U 4 Replace PS66. - 5 Replace SDCB.