• Code: 2010
• Description: Main motor startup error Main motor is not stabilized within 1 s since the motor is activated.
• Causes: Main motor. Engine PWB
• Remedy: Main motor 1. To check the motor operation execute U030 Main (main motor). 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Main motor and Engine PWB (YC13) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the main motor.
  Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.

• Code: 2500
• Description: Paper feed motor steadystate error The rated speed signal detected the stability OFF continuously for 2 s after the paper feed motor stabilizes.
• Causes: Paper feed motor. Engine PWB
• Remedy: Paper feed motor 1. To check the motor operation execute U030 Feed (paper feed motor). 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Paper feed motor and Engine PWB (YC13) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor.
  Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.

• Code: 2510
• Description: Paper feed motor startup error Paper feed motor is not stabilized within 1 s since the motor is activated.
• Causes: Paper feed motor. Engine PWB
• Remedy: Paper feed motor 1. To check the motor operation execute U030 Feed (paper feed motor). 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Paper feed motor and Engine PWB (YC13) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor.
  Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.

• Code: 2600
• Description: PF drive motor error (paper feeder) After PF drive motor is driven, the ready signal does not turn to L within 2 s.
• Causes: PF drive motor. PF main PWB
• Remedy: PF drive motor 1. To check the feed unit operation, execute U247 2PF- Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF drive motor and PF main PWB 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the PF drive motor.
  PF main PWB Replace the PF main PWB.

• Code: 2610
• Description: PF drive motor error (large capacity feeder) After PF drive motor is driven, the ready signal does not turn to L within 2 s.
• Causes: PF drive motor. PF main PWB
• Remedy: PF drive motor 1. To check the feed unit operation, execute U247 LCF- Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF drive motor and PF main PWB 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the PF drive motor.
  PF main PWB Replace the PF main PWB.

• Code: 3100
• Description: Scanner carriage error ON/OFF of the HP sensor doesn't change after a prescribed pulse passes from power supply ON.
• Causes: The scanner mirror frame is being locked after setup. Scanner motor. Home position sensor. Engine PWB. Main PWB
• Remedy: The scanner mirror frame is being locked after setup. Check whether the scanner mirror frame has been unlocked and unlock if necessary.
  Scanner motor 1. To check the scanner motor, execute U073. 2. Move the scanner by the hand to check whether it is unusually difficult to move. 3. Check that the optical wire rope is not disengaged and engage the wire. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Scanner motor and Engine PWB (YC34) Engine PWB (YC37) and Main PWB (YC65) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the scanner motor.
  Home position sensor 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Home position sensor and Engine PWB (YC34) 3. Replace the home position sensor.
  Engine PWB Replace the Engine PWB and execute U411.
  Main PWB Replace the main PWB.

• Code: 3200
• Description: LED lamp startup error The white reference data acquired by lighting the lamp at the initial operation is at the specified value or less. (Over 2 LED lamps do not light.)
• Causes: LED PWB. Engine PWB. Main PWB
• Remedy: LED PWB Check if the LED lamp lights by executing [CCD] at U061. If it does not light, replace the lamp unit and execute [Table(ChartA)] at U411.
  Engine PWB Replace the engine PWB.
  Main PWB Replace the main PWB.

• Code: 3210
• Description: CIS lamp error When input value at the time of CIS illumination does not exceed the threshold value between 5 s.
• Causes: CIS. DPSHD PWB. DP relay PWB
• Remedy: CIS 1. Execute U906 Separating Operation Release. 2. Execute CIS of U061 lamp check. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CIS and DPSHD PWB (YC2) DPSHD PWB (YC3) and DP relay PWB (YC2) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the CIS and execute U091 and U411.
  DPSHD PWB Replace the DPSHD PWB.
  DP relay PWB Replace the DP relay PWB.