• Code: 200.30
• Description: Paper hit input sensor too soon. Possible causes:
  • Incorrect paper loading.
  • Damaged input sensor flag or input sensor.
  • Faulty system board.
• Remedy: • Fan the media, and then stack flat in the tray. • Check for anything in the paper path that might cause the paper to jam. • The input sensor may not be functioning properly.

• Code: 201.02
• Description: Bubble sensor active when printing started. Possible causes:
  • Paper jam leaving page over sensor.
  • Damaged bubble sensor.
  • Damaged fuser autoconnect.
  • Faulty fuser DC cable connection.
  • Faulty fuser.
  • Faulty system board.
• Remedy: 1. Clear away anything in the paper path that might cause the paper to jam. 2. Ensure proper media is set for the type of paper used. 3. Fan media, and stack flat in the tray.

• Code: 201.06
• Description: Paper is jammed between the inputsensor and the exit sensor. Possible causes:
  • Damaged paper exit sensor or paper exit sensor flag
  • Transport belt module failure
  • Aligner failure
  • Damaged fuser autoconnect
  • Faulty fuser DC cable connection
  • Faulty fuser
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 201.07
• Description: Exit sensor is made early. Possible causes:
  • Damaged paper exit sensor or paper exit sensor flag
  • Damaged fuser autoconnect
  • Faulty fuser DC cable connection
  • Faulty fuser
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam.

• Code: 201.08
• Description: Exit sensor is never made. Possible causes:
  • Improper loading
  • Paper wrapped in fuser
  • Damaged paper exit sensor or paper exit sensor flag
  • Damaged fuser autoconnect
  • Faulty fuser DC cable connection
  • Faulty fuser
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly

• Code: 201.10
• Description: Input sensor flag broke early. Possible causes:
  • Incorrect media set
  • Defective input sensor
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam. • Ensure the proper media is set for the type of paper used.

• Code: 201.17
• Description: Power up or cover closed with bubble sensor active. Possible causes:
  • Paper jam leaving page over sensor.
  • Damaged bubble sensor.
  • Damaged fuser autoconnect.
  • Faulty fuser DC cable connection.
  • Faulty fuser.
  • Faulty system board.
• Remedy: 1. Ensure the proper media is set for the type of paper used. 2. Fan the media, and stack flat in the tray or multipurpose feeder. 3. Properly set media restraints in the paper tray. 4. Clear away anything in the paper path that might cause the paper to jam.

• Code: 201.21
• Description: Cartridge motor 1 (top) or cartridgemotor 2 (middle) has stalled. Possible causes:
  • Faulty cable/connector
  • Faulty cartridge motor
  • Faulty system board
• Remedy: • Check for anything in the paper path that might cause the paper to jam.