Code :

Code: 56
Description: Serial port [x] disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the serial port. •Make sure the Serial Buffer menu is not set to Disabled.

Code: 56
Description: Standard USB port disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the USB port. •Make sure the USB Buffer menu item is not set to Disabled.

Code: 56
Description: Standard parallel port disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the parallel port. •Make sure the Parallel Buffer menu item is not set to Disabled.

Code: 56
Description: USB port [x] disabled
Remedy: Try one or more of the following: •Touch Continue to clear the message. The printer discards any data received through the USB port. •Make sure the USB Buffer menu is not set to Disabled.

Code: 57
Description: Configuration change, some held jobs were not restored
Remedy: Something has changed in the printer to invalidate the held jobs. Possible changes include: •The printer firmware has been updated. •Paper input options needed for the print job were removed. •The print job was created using data from a device in the USB port and the device is no longer in the USB port. •The printer hard disk contains print jobs that were stored while installed in a different printer model. Touch Continue to clear the message.

Code: 58
Description: Too many disks installed
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the excess disks. 4.Connect the power cord to a properly grounded electrical outlet. 5.Turn the printer back on.

Code: 58
Description: Too many flash options installed
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the excess flash memory. 4.Connect the power cord to a properly grounded outlet. 5.Turn the printer back on.

Code: 58
Description: Too many trays attached
Remedy: 1.Turn the printer off. 2.Unplug the power cord from the wall outlet. 3.Remove the additional trays. 4.Connect the power cord to a properly grounded outlet. 5.Turn the printer back on.