Code :

Code: 016-706
Description: Max. User Number Exceeded
Causes: Over the maximum number of users of security/sample print.Delete unnecessary message and registered users of security print, and print again.

Code: 016-707
Description: Sample Print Fail
Causes: Fail to register sample print because HDD is not installed or it is failure. Check that HDD is installed. Enter the Diag Program Hard Disk, and examine the trouble of DC355 Hard Disk.

Code: 016-709
Description: ART EX Command Error
Causes: When processing PLW, ART EX command error causes. Cancel the job, and execute the job again.

Code: 016-710
Description: Delayed Print Fail
Causes: Delete the condition to make impossible Delay Print.(Install HD and so on)

Code: 016-716
Description: Unable to spool TIFF Data
Causes: Cannot spool TIFF file due to lack of memory. If HDD is not installed, install it. If it is installed, add the capacity.

Code: 016-721
Description: Other Error
Causes: Unexpected error is caused when printing. Causes maybe as follows. 1. It is printed by auto tray selection while [Paper priority] is set to [no setting] for all paper types in the common menu [Printing settings]. 2.ESC/P command errorCheck printing data

Code: 016-726
Description: PDL Auto Switch Fail
Causes: Printing language cannot be selected automatically when printing mode is set to [Auto]. Causes maybe as follows. 1. PostScript Data is sent without installing PostScript software.Install PostScript software kit. 2. PDF file is directly sent to the machine by using LPR while the internal HDD is not installed though PostScript software is installed. Install intertnal HDD. 3. Data of ART Ⅳ , 201H, ESC/P, HP-GL, or HP-GL/2 is sent with the printing mode [Auto] when ART Ⅳ /Emulation kit is not installed. Install ART Ⅳ / Emulation kit. (HP-GL and HP-GL/2 can be used by PostScript software kit.)