Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi OKI B6300 — Trang 9/27

Code: 010-349

Description: Fuser STS Front Disconnection Fail
Causes: Detect Fuser trouble. Replace Fuser Assy if Power OFF and ON cannot recover the FAIL.

Code: 010-420

Description: Fuser Unit Pre Warning
Causes: In the case that PV of Fuser comes to the specified value and the life time to be end. Replace Fuser Unit, and Reset HFSI counter.

Code: 011-108

Description: OCT Jam 1 (Paper doesn’ t reach OCT)
Causes: Paper doesn’ t come to OCT Sensor from Exit Sensor within the specific time. Slip of Feed Roll, wear, fail of rotationDirt or defect of Sensor OCT

Code: 011-109

Description: OCT Jam 2 (Paper is not ejected form OCT)
Causes: Paper is not ejected from OCT Sensor within the specific time, or OCT Sensor is On while Engine Warming up. Slip of Feed Roll, wear, fail of rotation Dirt or defect of Sensor OCT

Code: 012-300

Description: Faceup Tray is opened while printing.
Causes: Detect Cover Interlock Open of FaceUpTray in a job,or Standard mode,or Faceup Tray is opened while printing in OCT mode. Dirt or defect of Sensor Face Up Open

Code: 012-951

Description: OCT_FULL_STACK
Causes: Detect Full Stack(OCT) Detect paper left in the offset ejecting tray. Remove paper in IOT Face Down Tray. Dirt or defect of Sensor Full Stack

Code: 012-952

Description: FaceUP Tray Open
Causes: Detect that Faceup Tray is opened though printing out to Facedown Tray or OCT is specified. Dirt or defect of Sensor Face Up Open

Code: 012-953

Description: FaceUP Tray Close
Causes: Detect that Faceup Tray is closed though printing out to Faceup Tray is specified. Dirt or defect of Sensor Face Up Open
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie