Code :

Code: 0001
Description: Transport motor malfunction
Causes: • The motor lock signal remains HIGH for a predetermined consecutive period of time while the transport motor remains

Code: 001B
Description: Developing motor malfunction
Causes: • The developing motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the developing motor is being rotated.

Code: 0045
Description: Exit tray cooling fan motor malfunction
Causes: • The fan motor lock signal remains HIGH for a given period of consecutive time while the exit tray cooling fan motor is being rotated.

Code: 004C
Description: Ozone ventilation fan motor malfunction
Causes: • The ozone ventilation fan motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the ozone ventilation fan motor is being rotated.

Code: 004E
Description: DC power supply fan motor malfunction
Causes: • The DC power supply fan motor does not rotate evenly even after the lapse of a given period of time while it is being started. • The motor lock signal remains HIGH for a given period of consecutive time while the DC power supply fan motor is being rotated.

Code: 0092
Description: Transfer belt rotation failure
Causes: • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated.

Code: 0094
Description: 2nd image transfer pressure / retraction failure
Causes: • The 2nd image transfer retraction position sensor is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started.

1 2 3 4 >