Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1232C

Code: 101

Description: Exposure lamp error
The standard white level is not properly detected when scanning the shading plate. (The shading data peak does not reach the specified threshold.)
Causes: • Exposure lamp defective • Lamp stabilizer defective • Exposure lamp connector defective • Standard white plate dirty • Scanner mirror or scanner lens out of position or dirty • SBU defective

Code: 120

Description: Scanner home position error 1
The scanner home position sensor does not detect the on condition during scanning.
Causes: • Scanner I/O board or SBU defective • Scanner motor defective • Harness between scanner I/O board and scanner motor disconnected • Scanner HP sensor defective • Harness between SBU and HP sensor disconnected • Scanner wire, timing belt, pulley, or carriage defective

Code: 121

Description: Scanner home position error 2
The scanner home position sensor does not detect the off condition during scanning.
Causes: • Scanner I/O board or SBU defective • Scanner motor defective • Harness between scanner I/O board and scanner motor disconnected • Scanner HP sensor defective • Harness between SBU and HP sensor disconnected • Scanner wire, timing belt, pulley, or carriage defective

Code: 122

Description: Scanner home position error 3
The scanner home position sensor does not detect the home position during initialization.
Causes: • Scanner I/O board or SBU defective • Scanner motor defective • Harness between scanner I/O board and scanner motor disconnected • Scanner HP sensor defective • Harness between SBU and HP sensor disconnected • Scanner wire, timing belt, pulley, or carriage defective

Code: 142

Description: White level detection error
The white level cannot be adjusted within the target during auto gain control.
Causes: • Dirty exposure glass or optics section • SBU board defective • BICU board defective • Exposure lamp defective • Lamp stabilizer defective

Code: 161

Description: BICU error
• The correct value is not input into ASIC1 on the BICU board when the main switch is turned on. • ASICs on the BICU board are not recognized during scanning operation.
Causes: • BICU board defective (defective connection between ASICs)

Code: 195

Description: Serial number mismatch
Serial number stored in the memory is not correct. NOTE: Check the serial number with SP5-811-002. If the stored serial number is incorrect, contact your product specialist for details of how to solve the problem.
Causes: • NVRAM defective • BICU replaced without original NVRAM

Code: 201

Description: Polygon motor error
• The polygon motor starts operating. → The lock signal is not detected within 20 seconds. • The polygon motor starts operating. → The lock signal is detected within 20 seconds. → After a 3second waiting time, no lock signal is detected within 20 seconds. • The polygon motor stops operating. → The lock signal is not detected within 20 seconds. • The polygon motor is operating. → The lock signal remains undetected for 0.5 seconds.
Causes: • Defective polygon motor • Defective harness
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie