Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1232C — Trang 2/17

Code: 220

Description: 1st beam synchronization error
A polygon motor lock is detected; the LD door is closed; and the LD remains on. → The LD error (1st beam synchronization error) continues for 0.5 seconds.
Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BICU

Code: 221

Description: 2nd beam synchronization error
A polygon motor lock is detected; the LD door is closed; and the LD remains on. → The LD error (2nd beam synchronization error) continues for 0.5 seconds.
Causes: • Disconnected synchronization detector board • Defective LD unit • Defective BICU

Code: 230

Description: FGATE on error
A transfer belt mark is detected. → No FGATE on signal is detected within 1 second.
Causes: • Defective BICU

Code: 231

Description: FGATE off error
An FGATE assert signal is detected. → The FGATE negate signal is not detected within 30 seconds.
Causes: • Defective BICU

Code: 241

Description: LD error
An LD error continues for 0.5 seconds. (After an LD error is detected, an LD error release is written to the GAVD chip during monitoring.)
Causes: • Defective LD unit

Code: 280

Description: Image transfer belt mark detection error
• An imaging process starts. → No belt mark is detected within 1 revolution. • A color imaging process starts. → A mono color image is transferred. → FGATE becomes active. → No belt mark is detected within 1 revolution. • Thick paper or OHP film is used. → The belt slows down. → No belt mark is detected within 1 revolution.
Causes: • Defective BICU • Poor electrical connection between sensor and BICU

Code: 282

Description: GAVD communication error
Data is transferred. → The CPU does not detect the communication signal from GAVD.
Causes: • Defective BICU

Code: 300

Description: Charge corona unit electrical leak
The supply to the charge corona unit is continuously output, and the unit is operating at the minimum PWM duty value. → 4.5 Volts (or more) returns for 60 milliseconds.
Causes: • Short circuit in the charge corona unit • Defective high voltage supply board • Defective harness (BICU -high voltage supply board)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie