Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio 1232C — Trang 9/17

Code: 672

Description: Controller-to-operation panel communication error at startup
After powering on the machine, communication between the controller and operation panel does not begin, or the communication is interrupted after a normal startup.
Causes: • Controller stalled • Controller board installed incorrectly • Defective controller board • Operation panel connector loose or defective • Poor connection of DIMM and optional boards on the controller board

Code: 685

Description: SBU/IPU communication error
While data is sent between the scanner and BICU board, a communication error has occurred.
Causes: • Defective scanner unit cable • Defective SBU board • Defective BICU board

Code: 687

Description: PER command error
Some image data is transferred. → The controller does not report the necessary memory address.
Causes: • Poor connection between BICU and controller • Defective BICU • Defective controller

Code: 720

Description: Finisher jogger motor error (500-sheet finisher)
• The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. • The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger motor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 722

Description: Finisher jogger motor error (1000-sheet finisher)
The finisher jogger H.P sensor remains de-activated for a certain time when returning to home position. The finisher jogger H.P sensor remains activated for a certain time when moving away from home position.
Causes: • Jogger HP sensor defective • Jogger motor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 724

Description: Finisher staple hammer motor error (1000-sheet finisher)
Stapling does not finish within 600 ms after the staple hammer motor turned on.
Causes: • Staple jam • Stapler overload caused by trying to staple too many sheets • Staple hammer motor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 725

Description: Finisher stack feed-out motor error (1000-sheet finisher)
The stack feed-out belt H.P sensor does not activate within a certain time after the stack feed-out motor turned on.
Causes: • Stack feed-out HP sensor defective • Stack feed-out motor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation

Code: 726

Description: Finisher tray lift motor error (1000-sheet finisher)
The stack height sensor does not activate within a certain time after the tray lift motor turned on.
Causes: • Tray lift motor defective • Stack height sensor defective • Defective finisher control board • Defective BICU • Defective Ex-IOB • Incorrect installation
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie