Description: Self-Diagnostic Error 4: RTC Backup Battery Error
The RTC backup battery has discharged or the voltage of the installed battery is not within the specified range.
Description: Self-Diagnostic Error 5: ROM Error
Measuring the CRC for the boot monitor and operating system program results in an error. This check is not executed when booting the machine from an SD card.
Description: Self-Diagnostic Error 7: Engine I/F ASIC
NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel.
Causes: • The ASIC (Mandolin) for system control is defective • I/F between North Bridge and AGPI is defective NOTE: Replace the Mother Board.
Description: Self-Diagnostic Error 8: Optional Memory RAM DIMM
The write/verify check for the optional RAM chip on the engine I/F board (mother board) returned an error
Description: Self-Diagnostic Error 9: Clock Generator
Setup data is read from the clock generator via the I2C bus but differs from the prescribed value due to defects in the clock generator, in the I2C bus, or the I2C bus port for the PCU.
Causes: • Controller board defective
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.