Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Ricoh Aficio MP1100 — Trang 20/25

Code: SC791

Description: Booklet Stapler Output Motor
The stack feed out belt HP sensor failed to detect the feed out belt at the home position within the specified time.
Causes: • If the booklet stapler output motor is operating: 1 Stack feed out belt HP sensor harness loose, broken, defective 2 Stack feed out belt HP sensor defective
• If the booklet stapler output motor is not operating: 1 Motor blocked by an obstruction 2 Motor harness loose, broken, defective 3 Motor defective 4 Finisher main board defective

Code: SC817

Description: Monitor Error
This is a file detection and electronic file signature check error when the boot loader attempts to read the self-diagnostic module, system kernel, or root system files from the OS Flash ROM, or the items on the SD card in the controller slot are false or corrupted.
Causes: • OS Flash ROM data defective; change the controller firmware
• SD card data defective; use another SD card

Code: SC833

Description: Self-Diagnostic Error 7: Engine I/F ASIC
A read/write verify error done on the resident RAM on the mother board (Engine I/F board failed).
Causes: • Replace RAM DIMM on the mother board.
• Replace mother board

Code: SC851

Description: IEEE 1394 I/F Error
Driver setting incorrect and cannot be used by the 1394 I/F.
Causes: • NIB (PHY), LINK module defective; change the Interface Board
• Controller board defective

Code: SC853

Description: Wireless LAN Error 1
The board that holds the wireless LAN card can be accessed, but the wireless LAN card (802.11b/Bluetooth) itself could not be accessed while the machine was starting up.
Causes: • Wireless LAN card has been removed

Code: SC854

Description: Wireless LAN Error 2
The board that holds the wireless LAN card can be accessed, but the wireless LAN card (802.11b/Bluetooth) itself cannot be could not be accessed while the machine was operating.
Causes: • Wireless LAN card has been removed

Code: SC855

Description: Wireless LAN Error 3
An error is detected for the wireless LAN card (802.11b or Bluetooth).
Causes: • Wireless LAN card defective
• Wireless card connection not tight

Code: SC856

Description: Wireless LAN Error 4
An error is detected for the wireless LAN board (802.11b or Bluetooth).
Causes: • Wireless LAN card board defective
• PCI connector loose (External controller interface board)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie